More actions
(we like these too!) |
(Corrected infobox, added EOLs.) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 5: | Line 5: | ||
| | | | ||
|- | |- | ||
|FACP: Notifier NFS-320C <br />FACP Location: Unknown <br />System Type: Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br />System Coding: Temporal <br>Strobes Synchronized: Yes, SS <br />Date of last known Upgrade: 2020? <br />Year Opened: Unknown | |FACP: Notifier NFS-320C <br />FACP Location: Unknown <br />System Type: Single-Stage Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br />System Coding: Temporal <br>Strobes Synchronized: Yes, SS <br />Date of last known Upgrade: 2020? <br />Year Opened: Unknown | ||
|} | |} | ||
'''504 Patricia St''' is the address given to a small building in Jasper, AB. Its tenants are Scoops & Loops, The Raven Bistro and 3 Sheets Jasper. It is unknown when the building was built, but the fire alarm system was upgraded around 2020. | '''504 Patricia St''' is the address given to a small building in Jasper, AB. Its tenants are Scoops & Loops, The Raven Bistro and 3 Sheets Jasper. It is unknown when the building was built, but the fire alarm system was upgraded around 2020. | ||
| Line 18: | Line 18: | ||
====Automatic Detection Devices==== | ====Automatic Detection Devices==== | ||
There is a Notifier FST-851A addressable thermal heat detector in 3 Sheets Jasper, mounted on a System Sensor B210LPA base. | There is a Notifier FST-851A addressable thermal heat detector in 3 Sheets Jasper, mounted on a System Sensor B210LPA base. | ||
==== EOLs ==== | |||
There are Notifier EOL-CR end of line resistor plates on all signal circuits. | |||
==Former System Specifications (1990s-2020)== | ==Former System Specifications (1990s-2020)== | ||
{| style="float:right;border:2px solid black" | {| style="float:right;border:2px solid black" | ||
| Line 25: | Line 29: | ||
| | | | ||
|- | |- | ||
|FACP: Notifier SFP-400B<br />FACP Location: Unknown <br />System Type: Conventional<br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br />System Coding: Continuous<br>Strobes Synchronized: No<br />Date of last known Upgrade: 1990s<br />Year Decommissioned: 2020 | |FACP: Notifier SFP-400B<br />FACP Location: Unknown <br />System Type: Single-Stage Conventional<br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br />System Coding: Continuous<br>Strobes Synchronized: No<br />Date of last known Upgrade: 1990s<br />Year Decommissioned: 2020 | ||
|} | |} | ||
====FACP==== | ====FACP==== | ||
| Line 35: | Line 39: | ||
All pull stations were Notifier NFM-950B conventional pull stations. | All pull stations were Notifier NFM-950B conventional pull stations. | ||
====Automatic Detection Devices==== | ====Automatic Detection Devices==== | ||
There was an FDD | There was an FDD CR-135 conventional 135°F fixedt-temperature/rate-of-rise heat detector in 3 Sheets Jasper. | ||
==== EOLs ==== | |||
There were Notifier EOL-CR end of line resistor plates on all signal circuits. | |||
[[Category:Alberta]] | |||
[[Category:Commercial]] | |||
[[Category:Retail Stores]] | |||
[[Category:Restaurants]] | |||
Latest revision as of 22:05, 6 September 2024
| System Specifications |
|---|
| FACP: Notifier NFS-320C FACP Location: Unknown System Type: Single-Stage Addressable System Line Voltage: 120VAC NAC Voltage: 24VDC System Coding: Temporal Strobes Synchronized: Yes, SS Date of last known Upgrade: 2020? Year Opened: Unknown |
504 Patricia St is the address given to a small building in Jasper, AB. Its tenants are Scoops & Loops, The Raven Bistro and 3 Sheets Jasper. It is unknown when the building was built, but the fire alarm system was upgraded around 2020.
System Specifications (2020-present)[edit | edit source]
FACP[edit | edit source]
The building is protected by a Notifier NFS-320C addressable fire alarm system. The panel location is unknown. The system runs Notifier’s FlashScan addressable protocol, and the system coding is temporal.
Notification Appliances[edit | edit source]
All notification appliances are System Sensor “L-Series” P2RLA horn/strobes (red, wall-mount, set to 15cd).
Initiating Devices[edit | edit source]
Pull Stations[edit | edit source]
All pull stations are Notifier NBG-12LX addressable dual-action pull stations.
Automatic Detection Devices[edit | edit source]
There is a Notifier FST-851A addressable thermal heat detector in 3 Sheets Jasper, mounted on a System Sensor B210LPA base.
EOLs[edit | edit source]
There are Notifier EOL-CR end of line resistor plates on all signal circuits.
Former System Specifications (1990s-2020)[edit | edit source]
| Former System Specifications |
|---|
| FACP: Notifier SFP-400B FACP Location: Unknown System Type: Single-Stage Conventional System Line Voltage: 120VAC NAC Voltage: 24VDC System Coding: Continuous Strobes Synchronized: No Date of last known Upgrade: 1990s Year Decommissioned: 2020 |
FACP[edit | edit source]
The building was protected by a Notifier SFP-400B conventional fire alarm system. The panel location was unknown. The system coding was continuous.
Notification Appliances[edit | edit source]
All notification appliances were System Sensor “Multi-Alert Sounder/Strobe” MASS24LO sounder/strobes (red, wall-mount, 1.5cd). These were set to 800Hz continuous.
Initiating Devices[edit | edit source]
Pull Stations[edit | edit source]
All pull stations were Notifier NFM-950B conventional pull stations.
Automatic Detection Devices[edit | edit source]
There was an FDD CR-135 conventional 135°F fixedt-temperature/rate-of-rise heat detector in 3 Sheets Jasper.
EOLs[edit | edit source]
There were Notifier EOL-CR end of line resistor plates on all signal circuits.