More actions
mNo edit summary |
No edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 5: | Line 5: | ||
| | | | ||
|- | |- | ||
|FACP: Mircom FA-1000<br /> FACP Location: Unknown <br> System Type: Conventional<br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR<br /> System Coding: Temporal? <br> Date of last known Upgrade: 2000s<br />Year Opened: 1980 | |FACP: Mircom FA-1000<br /> FACP Location: Unknown <br> System Type: Single-Stage Conventional<br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR<br /> System Coding: Temporal? <br> Date of last known Upgrade: 2000s<br />Year Opened: 1980 | ||
|} | |} | ||
'''Centre 1110''' is a multi-story office building located at 1110 Centre Street Northeast, in Crescent Heights, Calgary, Alberta, Canada. It was built in 1980 but only the bells may be original. | '''Centre 1110''' is a multi-story office building located at 1110 Centre Street Northeast, in Crescent Heights, Calgary, Alberta, Canada. It was built in 1980 but only the bells may be original. | ||
| Line 20: | Line 20: | ||
====Automatic Detection Devices==== | ====Automatic Detection Devices==== | ||
None noticed. | None noticed. | ||
==== EOLs ==== | |||
There are Edwards EOL-P1 end of line resistor plates on all circuits. | |||
[[Category:Calgary]] | |||
[[Category:Commercial]] | |||
Latest revision as of 17:24, 23 September 2024
| System Specifications |
|---|
| FACP: Mircom FA-1000 FACP Location: Unknown System Type: Single-Stage Conventional System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Temporal? Date of last known Upgrade: 2000s Year Opened: 1980 |
Centre 1110 is a multi-story office building located at 1110 Centre Street Northeast, in Crescent Heights, Calgary, Alberta, Canada. It was built in 1980 but only the bells may be original.
System Specifications (Late 1980s-present)[edit | edit source]
FACP[edit | edit source]
The building is protected by a Mircom Series 1000 conventional fire alarm system. The panel location is unknown, and replaced an Edwards Custom 6500. The system coding is likely temporal.
Annunciators[edit | edit source]
There is a Mircom RAM-1032TZDS annunciator at the main entrance.
Notification Appliances[edit | edit source]
All notification appliances are Edwards "Durabel" 6100D vibrating bells (10" gong).
Initiating Devices[edit | edit source]
Pull Stations[edit | edit source]
Most pull stations are Edwards 275-C111 conventional single-action pull stations. Some areas have Notifier MPS-950B conventional single-action pull stations as deficiency replacements.
Automatic Detection Devices[edit | edit source]
None noticed.
EOLs[edit | edit source]
There are Edwards EOL-P1 end of line resistor plates on all circuits.