More actions
(Overhauled. Looks like an Advanced protocol system.) |
No edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 6: | Line 6: | ||
|- | |- | ||
|FACP: Mircom FX-2000 | |FACP: Mircom FX-2000 | ||
FACP Location: Main Floor Boiler Room | FACP Location: Main Floor Boiler Room | ||
System Type: Addressable | System Type: Single-Stage Addressable | ||
System Line Voltage: 120VAC | System Line Voltage: 120VAC | ||
| Line 25: | Line 24: | ||
==System Specifications== | ==System Specifications== | ||
===FACP=== | ===FACP=== | ||
The building is protected by a Mircom FX-2000 | The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main floor boiler room. The system runs Mircom's Advanced addressable protocol, and the system coding is temporal. | ||
=====Annunciators===== | =====Annunciators===== | ||
There is a Mircom RAX-LCD annunciator located at the front entrance. | There is a Mircom RAX-LCD annunciator located at the front entrance. | ||
| Line 40: | Line 39: | ||
Other pull stations consist of Mircom MS-401AP addressable single action pull stations, installed as deficiency replacements. | Other pull stations consist of Mircom MS-401AP addressable single action pull stations, installed as deficiency replacements. | ||
====Automatic Detection Devices==== | ====Automatic Detection Devices==== | ||
There is a MIX-2251AP at the top of each stairwell, mounted on a System Sensor B210LPA bases. | There is a Mircom MIX-2251AP at the top of each stairwell, mounted on a System Sensor B210LPA bases. | ||
==== EOLs ==== | |||
There are Mircom MP-300 end-of-line resistor plates on all signal circuits. | |||
[[Category:Facilities]] | [[Category:Facilities]] | ||
[[Category:Calgary]] | |||
[[Category:Residential]] | |||
Latest revision as of 17:11, 14 October 2024
| System Specifications |
|---|
| FACP: Mircom FX-2000
FACP Location: Main Floor Boiler Room System Type: Single-Stage Addressable System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Temporal Strobes Synchronized: NO! Date of last known Upgrade: 2010s Year Opened: 2005 |
Vogue is a 4 story condominium building located at 930 6 Ave SW, Calgary, AB. The building was constructed in 2005 and the system may be original aside from the panel and some deficiency replacements.
System Specifications[edit | edit source]
FACP[edit | edit source]
The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main floor boiler room. The system runs Mircom's Advanced addressable protocol, and the system coding is temporal.
Annunciators[edit | edit source]
There is a Mircom RAX-LCD annunciator located at the front entrance.
Notification Appliances[edit | edit source]
Most notification appliances are System Sensor "SpectrAlert" P1224MCKA weatherproof horn/strobes (red, wall-mount, set to electromechanical, 75cd).
There are some System Sensor "L-Series" P2RLA horn/strobes (red, wall-mount, set to 15cd/electromechanical) as deficiency replacements, due to the building being a walkup and the horn/strobes being exposed to the elements.
There is one Mircom FHS-400-RR horn/strobe (red, wall-mount, set to 15cd) in the boiler room.
Initiating Devices[edit | edit source]
Pull Stations[edit | edit source]
Most pull stations are in outdoor spaces. There are two Mircom MS-401 single-action conventional pull stations mounted at each stairwell/exit, wired to a Mircom MIX-M500DMAP dual monitor module mounted in the West stairwell on each floor to monitor each of the two pull stations on that floor.
Other pull stations consist of Mircom MS-401AP addressable single action pull stations, installed as deficiency replacements.
Automatic Detection Devices[edit | edit source]
There is a Mircom MIX-2251AP at the top of each stairwell, mounted on a System Sensor B210LPA bases.
EOLs[edit | edit source]
There are Mircom MP-300 end-of-line resistor plates on all signal circuits.