Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

8805 Highway 11, Iroquois Falls: Difference between revisions

From FireAlarmPedia
No edit summary
(Falls)
 
Line 5: Line 5:
|  
|  
|-
|-
| FACP: Siemens FireFinder XLS <br />FACP Location: Entrance <br />System Type: Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br />System Coding: Temporal <br>Strobes Synchronized: Yes, Siemens <br />Date of last known Upgrade: 2010s <br />Year Opened: circa 1987
| FACP: Siemens FireFinder XLS <br />FACP Location: Entrance <br />System Type: Single-Stage Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br />System Coding: Temporal <br>Strobes Synchronized: Yes, Siemens <br />Date of last known Upgrade: 2010s <br />Year Opened: circa 1987
|}
|}
'''8805 Highway 11''' is the address given to an industrial complex in Iroquois Falls, Ontario. It has two separate manufacturing/service areas. It was built in 1987, and the fire alarm system was upgraded in the 2010s.
'''8805 Highway 11''' is the address given to an industrial complex in Iroquois Falls, Ontario. It has two separate manufacturing/service areas. It was built in 1987, and the fire alarm system was upgraded in the 2010s.
Line 12: Line 12:
The building is protected by a Siemens FireFinder XLS addressable fire alarm system. The panel is located near the main entrance. The system runs Siemens’ FirePrint addressable protocol, and the system coding is temporal.
The building is protected by a Siemens FireFinder XLS addressable fire alarm system. The panel is located near the main entrance. The system runs Siemens’ FirePrint addressable protocol, and the system coding is temporal.
==== Notification Appliances ====
==== Notification Appliances ====
All notification appliances are Siemens MT-MC-R-B multi-tone horn/strobes (red, wall-mount, bilingual lettering, set to horn/15cd).  
All notification appliances are Siemens MTH-MC-R-B multi-tone horn/strobes (red, wall-mount, bilingual lettering, set to horn/15cd).  
=== Initiating Devices ===
=== Initiating Devices ===
==== Pull Stations ====
==== Pull Stations ====
All pull stations are Siemens HMS-SA addressable single-action pull stations.
All pull stations are Siemens HMS-SA addressable single-action pull stations.
==== Automatic Detection Devices ====
==== Automatic Detection Devices ====
None noticed, waterflow is present.
None noticed.
==== Modules ====
==== Modules ====
There are System Sensor EPS10-1 alarm pressure flow switches monitoring the sprinkler system. These and the tamper switches are wired to Siemens XTRI-M addressable monitor modules.
There are System Sensor EPS10-1 alarm pressure flow switches monitoring the sprinkler system. These and the tamper switches are wired to Siemens XTRI-D addressable monitor modules.
 
==== EOLs ====
There are Siemens EL-300C end of line resistor plates on all sprinkler and signal circuits.
[[Category:Ontario]]
[[Category:Ontario]]
[[Category:Industrial]]
[[Category:Industrial]]

Latest revision as of 10:26, 8 September 2024

System Specifications
FACP: Siemens FireFinder XLS
FACP Location: Entrance
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Strobes Synchronized: Yes, Siemens
Date of last known Upgrade: 2010s
Year Opened: circa 1987

8805 Highway 11 is the address given to an industrial complex in Iroquois Falls, Ontario. It has two separate manufacturing/service areas. It was built in 1987, and the fire alarm system was upgraded in the 2010s.

System Specifications (2010s-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by a Siemens FireFinder XLS addressable fire alarm system. The panel is located near the main entrance. The system runs Siemens’ FirePrint addressable protocol, and the system coding is temporal.

Notification Appliances[edit | edit source]

All notification appliances are Siemens MTH-MC-R-B multi-tone horn/strobes (red, wall-mount, bilingual lettering, set to horn/15cd).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Siemens HMS-SA addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

None noticed.

Modules[edit | edit source]

There are System Sensor EPS10-1 alarm pressure flow switches monitoring the sprinkler system. These and the tamper switches are wired to Siemens XTRI-D addressable monitor modules.

EOLs[edit | edit source]

There are Siemens EL-300C end of line resistor plates on all sprinkler and signal circuits.