Midnapore Mall: Difference between revisions

Latest revision as of 13:02, 13 October 2024

System Specifications

FACP: Notifier NFS-320C FACP Location: Electrical Room System Type: Single-Stage Addressable System Line Voltage: 120VAC NAC Voltage: 24VDC System Coding: Temporal Strobes Synchronized: Yes, System Sensor Date of last known Upgrade: 2021 Year Opened: 1979

The Midnapore Mall is a strip mall located at 240 Midpark Way SE, in Calgary, Alberta, Canada. The building was built in 1979 as an indoor shopping mall, and was converted into a strip mall in 2000. The fire alarm system was upgraded in 2021.

System Specifications[edit | edit source]

FACP[edit | edit source]

The building is protected by a Notifier NFS-320C addressable fire alarm system. The panel is located in an electrical room. The system runs Notifier's FlashScan addressable protocol, and the system coding is temporal.

Notification Appliances[edit | edit source]

All notification appliances are System Sensor "L-Series" P2RLA horn/strobes (red, wall-mount, set to 15cd).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Notifier N-MPS-SA addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

None noticed.

Modules[edit | edit source]

There are Notifier FMM-1A addressable monitor modules supervising the sprinkler system's tamper and flow switches.

EOLs[edit | edit source]

There are Notifier EOL-CR end of line resistor plates on all sprinkler and signal circuits.

Former System Specifications[edit | edit source]

System Specifications

FACP: Mircom FA-1000 FACP Location: Electrical Room System Type: Single-Stage Conventional System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Temporal Date of last known Upgrade: Mid-2000s Year Decommissioned: 2020

FACP[edit | edit source]

The building was protected by a Mircom Series 1000 conventional fire alarm system. The panel was located in an electrical room. The system coding was likely temporal.

Notification Appliances[edit | edit source]

Most notification appliances were Edwards 439D-6AWC vibrating bells (6" gong).

Some areas had Mircom BL-6B motor bells (6" gong) as deficiency replacements.

Value Village had Edwards "Durabel" 6100D vibrating bells (10" gong).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations were Mircom MS-401 (single action, conventional) pull stations.

Automatic Detection Devices[edit | edit source]

There were System Sensor C2W-BA conventional photoelectric smoke detectors in some areas.

@@ Line 5: / Line 5: @@
 |
 |-
-| FACP: Notifier NFS-320C <br />System Type: Addressable <br /> System Line Voltage: 120VAC<br />NAC Voltage:24VDC<br />Date of last known Upgrade: 2021<br />Year Opened: 1979
+| FACP: Notifier NFS-320C <br />FACP Location: Electrical Room <br>System Type: Single-Stage Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC<br />System Coding: Temporal <br>Strobes Synchronized: Yes, System Sensor <br>Date of last known Upgrade: 2021<br />Year Opened: 1979
 |}
-'''Midnapore Mall''' is a strip mall in Midnapore, Calgary built in 1979 as an indoor shopping mall. In 2000 the building was converted to a strip-type mall. The system just recently underwent a complete overhaul and there are no original devices left.
+The '''Midnapore Mall''' is a strip mall located at 240 Midpark Way SE, in Calgary, Alberta, Canada.  The building was built in 1979 as an indoor shopping mall, and was converted into a strip mall in 2000.  The fire alarm system was upgraded in 2021.
 ==System Specifications==
 ===FACP===
-The building is protected by a Notifier NFS-320C addressable fire alarm system. The panel is located in an electrical room. The system runs Notifier's FlashScan addressable protocol, and does code 3 in alarm.
+The building is protected by a Notifier NFS-320C addressable fire alarm system. The panel is located in an electrical room. The system runs Notifier's FlashScan addressable protocol, and the system coding is temporal.
 ====Notification Appliances====
-All notification appliances are System Sensor "L-Series" P2RLA horn/strobes (red, wall-mount, bilingual).
+All notification appliances are System Sensor "L-Series" P2RLA horn/strobes (red, wall-mount, set to 15cd).
 ===Initiating Devices===
 ====Pull Stations====
 All pull stations are Notifier N-MPS-SA addressable single-action pull stations.
 ====Automatic Detection Devices====
-There are Notifier FSP-951A addressable photoelectric smoke detectors throughout the building.
+None noticed.
+====Modules====
+There are Notifier FMM-1A addressable monitor modules supervising the sprinkler system's tamper and flow switches.
+====EOLs====
+There are Notifier EOL-CR end of line resistor plates on all sprinkler and signal circuits.
@@ Line 27: / Line 31: @@
 |
 |-
-| FACP: Mircom FA-1000 <br />System Type: Conventional <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />Date of last known Upgrade: Mid-2000s <br />Year Decommissioned: 2020
+| FACP: Mircom FA-1000 <br />FACP Location: Electrical Room <br>System Type: Single-Stage Conventional <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />System Coding: Temporal <br>Date of last known Upgrade: Mid-2000s <br />Year Decommissioned: 2020
 |}
 ===FACP===
-The building was protected by a Mircom Series 1000 conventional fire alarm system. The panel was located in an electrical room. The system likely did code 3 in alarm.
+The building was protected by a Mircom Series 1000 conventional fire alarm system. The panel was located in an electrical room. The system coding was likely temporal.
 ====Notification Appliances====
-The notification appliances were a mix of mostly Edwards 439D-6AWC (6", Vibrating) bells with some replacement Mircom BL-6B (6", motorized) bells. Value Village had Edwards "Durabel" 6100D vibrating bells (10" gong).
+Most notification appliances were Edwards 439D-6AWC vibrating bells (6" gong).
+Some areas had Mircom BL-6B motor bells (6" gong) as deficiency replacements.
+Value Village had Edwards "Durabel" 6100D vibrating bells (10" gong).
 ===Initiating Devices===
 ====Pull Stations====
 All pull stations were Mircom MS-401 (single action, conventional) pull stations.
 ====Automatic Detection Devices====
-Most noticed were Mircom C2W-BA (photo, smoke) (System Sensor Rebrand) which is odd because they were not released until sometime after 2000.
+There were System Sensor C2W-BA conventional photoelectric smoke detectors in some areas.
 [[Category:Facilities]]
 [[Category:Calgary]]
 [[Category:Shopping Malls]]