Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

St. Anne Academic Centre: Difference between revisions

From FireAlarmPedia
No edit summary
No edit summary
 
Line 5: Line 5:
|  
|  
|-
|-
| FACP: EST QuickStart QSC <br /> FACP Location: Unknown <br />System Type: Conventional <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br /> System Coding: Temporal <br> Strobes Synchronized: Yes <br />Date of last known Upgrade: 2013 <br />Year Opened: 1909
| FACP: EST QuickStart QSC <br /> FACP Location: Unknown <br />System Type: Single-Stage Conventional <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br /> System Coding: Temporal <br> Strobes Synchronized: Yes, Genesis<br />Date of last known Upgrade: 2013 <br />Year Opened: 1909
|}
|}


Line 24: Line 24:
====Automatic Detection Devices====
====Automatic Detection Devices====
Not currently known.
Not currently known.
==== EOLs ====
There are Edwards EOL-P1 end of line resistor plates on all circuits.
[[Category:Facilities]]
[[Category:Facilities]]
[[Category:Calgary]]
[[Category:Calgary]]
[[Category:Schools]]
[[Category:Schools]]

Latest revision as of 15:04, 13 October 2024

System Specifications
FACP: EST QuickStart QSC
FACP Location: Unknown
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, Genesis
Date of last known Upgrade: 2013
Year Opened: 1909


St. Anne Academic Centre is a school in the Calgary Catholic Separate School district (CSSD). The school is located at 1010 21 Ave SE in the neighborhood of Ramsay, in Southeast Calgary. The school was originally built in 1909, was majorly expanded in the early 1960s, renovated around 1992, and the fire alarm system was upgraded in 2013.

System Specifications (2013-present)[edit | edit source]

FACP[edit | edit source]

The school is protected by an EST QuickStart QSC conventional fire alarm system. The panel location is unknown. The system coding is temporal.

Annunciators[edit | edit source]

There is an EST QSA-1-S cabinet with a QSC-CPU-1 LCD annunciator and SL30 zone card past the main entrance.

Notification Appliances[edit | edit source]

All interior notification appliances are EST “Genesis” G1R-HDVM horn/strobes (red, wall-mount, set to 15cd). These are mounted on two-device boxes, with one device facing each end of the hallways.

Outside, there are EST 757-8A-T horn/strobes (red, wall-mount, 110cd).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Edwards 270-SPO conventional single-action pull stations. These were installed following the 1992 renovation, and are the oldest devices on the system.

Automatic Detection Devices[edit | edit source]

Not currently known.

EOLs[edit | edit source]

There are Edwards EOL-P1 end of line resistor plates on all circuits.