Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

St. Mary's Parish: Difference between revisions

From FireAlarmPedia
No edit summary
No edit summary
 
Line 6: Line 6:
|-
|-
| FACP: EST QuickStart QS1
| FACP: EST QuickStart QS1
FACP Location: Unknown<br />System Type: Addressable <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR
FACP Location: Unknown<br />System Type: Single-Stage Addressable <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR


System Coding: Temporal
System Coding: Temporal
Line 23: Line 23:
==== Automatic Detection Devices ====
==== Automatic Detection Devices ====
None noticed.
None noticed.
==== EOLs ====
There are Edwards EOL-P1 end-of-line resistor plates on all signal circuits.
[[Category:Facilities]]
[[Category:Facilities]]
[[Category:Cochrane]]
[[Category:Cochrane]]
[[Category:Churches]]
[[Category:Churches]]

Latest revision as of 22:59, 13 October 2024

System Specifications
FACP: EST QuickStart QS1

FACP Location: Unknown
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR

System Coding: Temporal

Strobes Synchronized: Yes
Date of last known Upgrade: N/A
Year Opened: 2007

St. Mary's Parish is a church in Cochrane, AB. It is located at 10 River Heights Drive near the neighborhoods of River Heights and Fireside. It was built in 2007, and appears to have the original fire alarm system.

System Specifications[edit | edit source]

FACP[edit | edit source]

The church is protected by an EST QuickStart QS1 addressable fire alarm system. The panel itself is not visible, but is assumed to be a QuickStart QS1 due to the age and size of the church. The system runs EST's Signature addressable protocol, and the system coding is temporal.

Notification Appliances[edit | edit source]

The notification appliances are all from EST's "Genesis" line of products. Most of the notification appliances are EST G1-HDVM (white, wall mount, no FIRE marking) horn/strobes, which were specifically chosen to blend in with the walls. However, in the Chapel, there is one G1-HDVM, and one EST G1R-HDVM (red, wall mount, no FIRE lettering) horn/strobe, which is on a mismatched EST G1T (white) trim plate.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

The pull stations are all EST SIGA-270 addressable pull stations.

Automatic Detection Devices[edit | edit source]

None noticed.

EOLs[edit | edit source]

There are Edwards EOL-P1 end-of-line resistor plates on all signal circuits.