Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Scenic Bow Group Home 21: Difference between revisions

From FireAlarmPedia
(Yes, 4 inch bells exist. And yes, this system is still in service)
 
No edit summary
Line 24: Line 24:
There are System Sensor C2W-BA addressable photoelectric smoke detectors throughout the building.  <br>There are System Sensor 5601A conventional 135-degree fixed-temperature/rate-of-rise heat detectors in most non-living areas.  <br>There is a System Sensor 5603A conventional fixed-temperature heat detector in the kitchen.  <br>There are FDD CR-135 conventional 135-degree fixed-temperature/rate-of-rise heat detectors in the basement storage rooms.
There are System Sensor C2W-BA addressable photoelectric smoke detectors throughout the building.  <br>There are System Sensor 5601A conventional 135-degree fixed-temperature/rate-of-rise heat detectors in most non-living areas.  <br>There is a System Sensor 5603A conventional fixed-temperature heat detector in the kitchen.  <br>There are FDD CR-135 conventional 135-degree fixed-temperature/rate-of-rise heat detectors in the basement storage rooms.


==== EOLs ====
There are Simplex 2081-9040C end-of-line resistor plates on all circuits.
[[Category:Calgary]]
[[Category:Calgary]]
[[Category:Healthcare]]
[[Category:Healthcare]]

Revision as of 20:59, 12 October 2024

System Specifications
FACP: Simplex 4001
FACP Location: Main Office
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Continuous
Strobes Synchronized: N/A
Date of last known Upgrade: 2010s
Year Opened: 1987

Scenic Bow Place is a group home complex operated by Alberta Health Services. This page will cover Group Home 21, located at #116, 100 Scenic Bow Place NW, in Calgary, Alberta, Canada. The home was built in 1987, and the fire alarm system is partially original; most initiating devices were replaced in the 2010s.

System Specifications

FACP

The building is protected by a Simplex 4001 conventional fire alarm system. The panel is located in the main office. The system coding is continuous.

Notification Appliances

The notification appliance is a Simplex 2901-9328 vibrating bell (4” gong) located in the main corridor.

Initiating Devices

Pull Stations

There are no pull stations on this system.

Automatic Detection Devices

There are System Sensor C2W-BA addressable photoelectric smoke detectors throughout the building.
There are System Sensor 5601A conventional 135-degree fixed-temperature/rate-of-rise heat detectors in most non-living areas.
There is a System Sensor 5603A conventional fixed-temperature heat detector in the kitchen.
There are FDD CR-135 conventional 135-degree fixed-temperature/rate-of-rise heat detectors in the basement storage rooms.

EOLs

There are Simplex 2081-9040C end-of-line resistor plates on all circuits.