City of Airdrie-City Hall

System Specifications
FACP: Mircom FX-2000 FACP Location: Main Entrance Vestibule System Type: Single-Stage Addressable System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Temporal Strobes Synchronized: Yes, Mircom Date of last known Upgrade: 2003 Year Opened: 1985

The City Hall for the City of Airdrie is located at 400 Main St S, Airdrie, AB. The building originally was built in 1985 as SuperValu, and was converted to the city hall in 2003. The fire alarm system was upgraded in 2003.

System Specifications (2003-present)

FACP

The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Mircom’s CLIP addressable protocol, and the system coding is temporal.

Notification Appliances

Most notification appliances are Mircom “Select-a-Horn/Strobe” FHS-240R horn/strobes (red, wall-mount, set to 15cd/electromechanical).
There is a Mircom “Select-a-Horn” FH-240R remote horn (red, wall-mount, set to electromechanical) in the mechanical room.

Initiating Devices

Pull Stations

All pull stations are Mircom MS-401AD addressable single-action pull stations.

Automatic Detection Devices

Some areas have Mircom MIX-2251BA addressable photoelectric smoke detectors.
Other areas have Mircom MIX-5251RBA addressable 135°F fixed-temperature/rate of rise heat detectors.
All above detectors are mounted on System Sensor B210LPA bases.
The rooftop and air handling units have Mircom MIX-DH200PLA addressable photoelectric duct smoke detectors.

Modules

There are Mircom MIX-M500MA addressable monitor modules supervising the sprinkler system’s tamper and flow switches.
There are Mircom MIX-M500RA addressable relay modules serving various purposes.

EOLs

There are Mircom MP-300 end-of-line resistor plates on all sprinkler and signal circuits.