More actions
| Line 19: | Line 19: | ||
All pull stations are Notifier MPS-950B conventional single-action pull stations, wired to Notifier FMM-101A addressable monitor modules. | All pull stations are Notifier MPS-950B conventional single-action pull stations, wired to Notifier FMM-101A addressable monitor modules. | ||
====Automatic Detection Devices==== | ====Automatic Detection Devices==== | ||
There are Notifier FSP-751A addressable photoelectric smoke detectors throughout the station, mounted on | There are Notifier FSP-751A addressable photoelectric smoke detectors throughout the station, mounted on Notifier B710LPA bases. | ||
==== EOLs ==== | ==== EOLs ==== | ||
Latest revision as of 12:23, 24 October 2024
| System Specifications |
|---|
| FACP: Notifier AFP-200 FACP Location: Electrical Room System Type: Single-Stage Addressable System Line Voltage: 120VAC NAC Voltage: 24VDC System Coding: Temporal Strobes Synchronized: Yes, Self-Sync Date of last known Upgrade: 2024 Year Opened: 2003 |
Dalhousie Station is an LRT station located at 4785 Dalhousie Drive Northwest, in Calgary, Alberta, Canada. The station primarily serves the neighborhoods of Dalhousie and Varsity Estates, and is located adjacent to the Dalhousie Station Shopping Centre. The station also has bus connections to several neighborhoods. The station opened in 2003, and served as the northern terminus for the red line until the opening of Crowfoot Station in 2009. The fire alarm system is original.
System Specifications (2003-present)[edit | edit source]
FACP[edit | edit source]
The station is protected by a Notifier AFP-200 addressable fire alarm system. The panel is located in an electrical room. The system runs Notifier’s CLIP addressable protocol, and the system coding is temporal.
Notification Appliances[edit | edit source]
All notification appliances but one are System Sensor “SpectrAlert” P2415A horn/strobes (red, wall-mount, 15cd).
There is a System Sensor "L-Series" P2RLA horn/strobe (red, wall-mount, set to 15cd/electromechanical) at the entrance as a deficiency replacement.
Initiating Devices[edit | edit source]
Pull Stations[edit | edit source]
All pull stations are Notifier MPS-950B conventional single-action pull stations, wired to Notifier FMM-101A addressable monitor modules.
Automatic Detection Devices[edit | edit source]
There are Notifier FSP-751A addressable photoelectric smoke detectors throughout the station, mounted on Notifier B710LPA bases.
EOLs[edit | edit source]
There are Notifier EOL-CR end of line resistor plates on all signal circuits.