Save-On-Foods (Walden): Difference between revisions

Revision as of 10:28, 17 May 2021

Save-On-Foods is a grocery store chain in Western Canada that is owned by Overwaitea. This store is located on Walden Gate SE. This particular store was built in 2014, and has its original fire alarm system.

System Specifications

FACP

The main fire alarm panel is a Mircom FX-2000, original from 2014. It is not visible, but the annunciator is only compatible with the FX-2000. When the system goes into alarm, it does code-3.

Annunciators

The annunciator is a Mircom RAX-LCD, located right next to the main entrance. It is blocked by flyers and other merchandise normally, which is a fire code violation. It also does not have LED annunciation, which is another code violation, as Canadian Fire Codes require LED Annunciation on all panels and annunciators.

Notification Appliances

The main notification appliances are Mircom FHS-340R horn/strobes, set on broadband code 3. The other notification appliances on the ceiling are System Sensor "SpectrAlert Advance" PC2R (red, ceiling, 2-wire) horn/strobes, set on code 3.

Initiating Devices

Pull Stations

The pull stations are Mircom MS-401AP addressable "tab" pull stations.

Automatic Detection Devices

None noticed, but there are likely MIX-2251AP addressable photoelectric smoke detectors in the store.

@@ Line 1: / Line 1: @@
-'''Save-On-Foods''' is a grocery store chain in Western Canada that is owned by Overwaitea.  This store is located on Walden Gate SE. his particular store was built in 2014, and has its original fire alarm system.
+'''Save-On-Foods''' is a grocery store chain in Western Canada that is owned by Overwaitea. This store is located on Walden Gate SE. This particular store was built in 2014, and has its original fire alarm system.
 ==System Specifications==
 ====FACP====
-The main fire alarm panel is a Mircom FX-2000, original from 2014.  It is not visible, but the annunciator is only compatible with the FX-2000. When the system goes into alarm, it does code-3.
+The main fire alarm panel is a Mircom FX-2000, original from 2014. It is not visible, but the annunciator is only compatible with the FX-2000. When the system goes into alarm, it does code-3.
 ====Annunciators====
-The annunciator is a Mircom RAX-LCD, located right next to the main entrance.  It is blocked by flyers and other merchandise normally, which is a fire code violation.  It also does not have LED annunciation, which is another code violation, as Canadian Fire Codes require LED Annunciation on all panels and annunciators.
+The annunciator is a Mircom RAX-LCD, located right next to the main entrance. It is blocked by flyers and other merchandise normally, which is a fire code violation. It also does not have LED annunciation, which is another code violation, as Canadian Fire Codes require LED Annunciation on all panels and annunciators.
 ====Notification Appliances====
-The main notification appliances are Mircom FHS-340R horn/strobes, set on broadband code 3.  The other notification appliances on the ceiling are System Sensor "SpectrAlert Advance" PC2R (red, ceiling, 2-wire) horn/strobes, set on code 3.
+The main notification appliances are Mircom FHS-340R horn/strobes, set on broadband code 3. The other notification appliances on the ceiling are System Sensor "SpectrAlert Advance" PC2R (red, ceiling, 2-wire) horn/strobes, set on code 3.
 ===Initiating Devices===
 ====Pull Stations====
 The pull stations are Mircom MS-401AP addressable "tab" pull stations.
 ====Automatic Detection Devices====
 None noticed, but there are likely MIX-2251AP addressable photoelectric smoke detectors in the store.