Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Co-op (Lewisporte): Difference between revisions

From FireAlarmPedia
mNo edit summary
(Bye-bye, apostrophe.)
Line 4: Line 4:


====FACP====
====FACP====
The fire alarm panel is a Siemens TXL-1000.  It was installed in the late 2000s, and likely replaced some zones of the Pyrotronics System 3 in the main mall, or installed when the mall got it's Mircom FA-1000.  The panel is located near the former main entrance. The system is networked to the one in the main mall, so that when one goes into alarm, it trips the other system into alarm.
The fire alarm panel is a Siemens TXL-1000.  It was installed in the late 2000s, and likely replaced some zones of the Pyrotronics System 3 in the main mall, or installed when the mall got its Mircom FA-1000.  The panel is located near the former main entrance. The system is networked to the one in the main mall, so that when one goes into alarm, it trips the other system into alarm.


====Notification Appliances====
====Notification Appliances====

Revision as of 08:20, 8 April 2021

Co-op is a grocery store chain across Canada. This particular location is located in the Lewisporte Shopping Centre in Newfoundland and Labrador. It was built in the 1970s, but does not have the original fire alarm system.

System Specifications

FACP

The fire alarm panel is a Siemens TXL-1000. It was installed in the late 2000s, and likely replaced some zones of the Pyrotronics System 3 in the main mall, or installed when the mall got its Mircom FA-1000. The panel is located near the former main entrance. The system is networked to the one in the main mall, so that when one goes into alarm, it trips the other system into alarm.

Notification Appliances

The notification appliances are Siemens ZH-MC-R-B horn/strobes, installed in the late 2000s. There is one Faraday 3560 vibrating bell, but it is disconnected, as there's a horn/strobe right below it.

Initiating Devices

Pull Stations

The pull stations are all Siemens MS-51B conventional single action bilingual pull stations.

Automatic Detection Devices

None noticed.