Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Commonwealth Stadium: Difference between revisions

From FireAlarmPedia
(Page rewritten to fit modern format.)
Line 5: Line 5:
|  
|  
|-
|-
| FACP: EST3 <br />System Type: Addressable <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br />Date of last known Upgrade: 2012 <br />Year Opened: 1978, 2001
| FACP: Edwards EST3 <br /> FACP Location: Unknown <br> System Type: Addressable <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br /> System Coding: 20BPM (First Stage) <br> Temporal (GA) <br> Date of last known Upgrade: 2012 <br />Year Opened: 1978, 2001
|}
|}
The '''Commonwealth Stadium''' is an open-air, all-seater multipurpose stadium in the McCauley neighborhood of Edmonton. It is home to the Edmonton Football Team, formerly Edmonton Eskimos. The stadium was built in 1978, but went under facelifts over the years, most notably in 2012 when the current fire alarm system was installed.
The '''Commonwealth Stadium''' is an open-air, all-seater multipurpose stadium located at 11000 Stadium Road, in Edmonton, Alberta, Canada. The stadium is home to the Edmonton Elks of the Canadian Football League. The stadium opened in 1978, and the fire alarm system is from the 2000s.
== System Specifications ==
== System Specifications ==
==== FACP ====
==== FACP ====
The stadium is protected by a two-stage EST3 fire alarm system. It was installed in 2012, when the renovations were complete. There is an annunciator at an entrance, however the panel itself isn't visible. The EST3 most likely replaced an EST ESA2000 from 2001.
The building is protected by an Edwards EST3 hybrid-addressable fire alarm system. The panel location is unknown.  The system runs EST's Signature-series addressable protocol, and is configured for two-stage operation. First stage coding is 20BPM, followed by temporal in general alarm.  This panel likely replaced an EST ESA2000.
===== Annunciators =====
===== Annunciators =====
There is an EST 3-LCDANN at an entrance.
There is an Edwards EST3-LCDANN annunciator at an entrance.
==== Notification Appliances ====
==== Notification Appliances ====
The notification appliances are mainly Edwards MB10-24 motor bells on EST "Integrity" 403-5A-R strobe plates. These were installed over the course of 2009-12. In the washrooms, and some areas of the stadium, there are General Signal MB10-24 motor bells on EST "Integrity" 403-5A-R strobe plates, left over from the 2001 renovation.  
Most notification appliances are Edwards MB10-24 motor bells (10" gong) mounted on Edwards 403-5A-R strobe plates (15cd). The washrooms and some other areas have General Signal MB10-24 motor bells (10" gong) mounted on Edwards 403-5A-R strobe plates (15cd).  
=== Initiating Devices ===
=== Initiating Devices ===
==== Pull Stations ====
==== Pull Stations ====
The pull stations are EST SIGA-270P from the 2012 renovation, and some Edwards 270-GAO.
Most pull stations are EST SIGA-270P addressable two-stage single-action pull stations.  Some areas have Edwards 270-GAO conventional two-stage single-action pull stations, which are likely original.
==== Automatic Detection Devices ====
==== Automatic Detection Devices ====
None noticed.
None noticed.

Revision as of 09:54, 22 November 2022

System Specifications
FACP: Edwards EST3
FACP Location: Unknown
System Type: Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: 20BPM (First Stage)
Temporal (GA)
Date of last known Upgrade: 2012
Year Opened: 1978, 2001

The Commonwealth Stadium is an open-air, all-seater multipurpose stadium located at 11000 Stadium Road, in Edmonton, Alberta, Canada. The stadium is home to the Edmonton Elks of the Canadian Football League. The stadium opened in 1978, and the fire alarm system is from the 2000s.

System Specifications

FACP

The building is protected by an Edwards EST3 hybrid-addressable fire alarm system. The panel location is unknown. The system runs EST's Signature-series addressable protocol, and is configured for two-stage operation. First stage coding is 20BPM, followed by temporal in general alarm. This panel likely replaced an EST ESA2000.

Annunciators

There is an Edwards EST3-LCDANN annunciator at an entrance.

Notification Appliances

Most notification appliances are Edwards MB10-24 motor bells (10" gong) mounted on Edwards 403-5A-R strobe plates (15cd). The washrooms and some other areas have General Signal MB10-24 motor bells (10" gong) mounted on Edwards 403-5A-R strobe plates (15cd).

Initiating Devices

Pull Stations

Most pull stations are EST SIGA-270P addressable two-stage single-action pull stations. Some areas have Edwards 270-GAO conventional two-stage single-action pull stations, which are likely original.

Automatic Detection Devices

None noticed.