Sobeys (McKenzie Towne): Difference between revisions

Revision as of 20:53, 28 June 2021

System Specifications

FACP: Mircom FX-2000 System Type: Addressable System Line Voltage: 120VAC NAC Voltage: 24VFWR Date of last known Upgrade: 2020 Year Opened: 1998

Sobeys is a chain of grocery stores in Canada. This particular store is located in the McKenzie Towne neighbourhood of Southeast Calgary. This location was built in 1998, but the system has been replaced twice since then. The current system was installed following the 2020 renovation.
NOTE: Page is unfinished. Page will be finished soon, so check back later.

System Specifications

FACP

The store is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located at the main entrance, and was installed in 2020. When in alarm, the system likely does code 3. The permit issued for this fire alarm system was "Fire Alarm Control Panel replacement c/w horn strobes".

Notification Appliances

All notification appliances are Mircom FHS-400-RR LED horn/strobes (red, wall-mount). The horn/strobes mounted on the ceiling have the original lettering taped over with ceiling-oriented lettering on top. It is unknown why they didn't install ceiling-mount versions.

Initiating Devices

Pull Stations

All pull stations are Mircom MS-401AP "Advanced Protocol" addressable single-action pull stations.

Automatic Detection Devices

None noticed.

Former System Specifications

System Specifications

FACP: Mircom FX-350 System Type: Addressable System Line Voltage: 120VAC NAC Voltage: 24VFWR Date of last known Upgrade: N/A Year Decommissioned: 2020

FACP

The store was protected by a Mircom FX-350 addressable fire alarm system. It was installed in 2016 and decommissioned in 2020, so it wasn't in service for long. The panel was located in the front entrance. The system likely did code 3 in alarm.

Notification Appliances

All notification appliances were Mircom "Select-A-Horn" FH-340R horns (red, wall-mount).

Initiating Devices

Pull Stations

All pull stations were Mircom MS-401AP "Advanced Protocol" addressable single-action pull stations.

Automatic Detection Devices

None noticed.

Original System Specifications

System Specifications

FACP: EST 6616 System Type: Conventional System Line Voltage: 120VAC NAC Voltage: 24VFWR Date of last known Upgrade: N/A Year Decommissioned: 2016

FACP

The original fire alarm panel was an EST 6616 conventional fire alarm panel. It was located in the front entrance. This panel was decommissioned in 2016.

Notification Appliances

All notification appliances were EST "Integrity" 757-5A-T horn/strobes (red, wall-mount, 15cd).

@@ Line 48: / Line 48: @@
-==System Specifications (Original System)==
+== Original System Specifications ==
+{| style="float:right;border:2px solid black"
+|-
+! System Specifications
+|-
+|
+|-
+| FACP: EST 6616 <br />System Type: Conventional <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />Date of last known Upgrade: N/A <br />Year Decommissioned: 2016
+|}
 ====FACP====
 The original fire alarm panel was an EST 6616 conventional fire alarm panel.  It was located in the front entrance.  This panel was decommissioned in 2016.
 ====Notification Appliances====
-All notification appliances were EST "Integrity" 757-5A-T horn/strobes (red, wall-mount).
+All notification appliances were EST "Integrity" 757-5A-T horn/strobes (red, wall-mount, 15cd).
 ===Initiating Devices===
 ====Pull Stations====
-All pull stations were Edwards 270-SPO conventional single-action pull stations.
+The pull stations were Edwards 270-SPO conventional pull stations.
 ====Automatic Detection Devices====
 None noticed.