Midnapore Mall: Difference between revisions

Revision as of 11:24, 15 March 2022

System Specifications

FACP: Notifier NFS-320C System Type: Addressable System Line Voltage: 120VAC NAC Voltage:24VDC Date of last known Upgrade: 2021 Year Opened: 1979

Midnapore Mall is a strip mall in Midnapore, Calgary built in 1979 as an indoor shopping mall. In 2000 the building was converted to a strip-type mall. The system just recently underwent a complete overhaul and there are no original devices left.

System Specifications

FACP

The building is protected by a Notifier NFS-320C addressable fire alarm system. The panel is located in an electrical room. The system runs Notifier's FlashScan addressable protocol, and does code 3 in alarm.

Notification Appliances

All notification appliances are System Sensor "L-Series" P2RLA horn/strobes (red, wall-mount, bilingual).

Initiating Devices

Pull Stations

All pull stations are Notifier N-MPS-SA addressable single-action pull stations.

Automatic Detection Devices

There are Notifier FSP-951A addressable photoelectric smoke detectors throughout the building.

Former System Specifications

System Specifications

FACP: Mircom FA-1000 System Type: Conventional System Line Voltage: 120VAC NAC Voltage: 24VFWR Date of last known Upgrade: Mid-2000s Year Decommissioned: 2020

FACP

The building was protected by a Mircom Series 1000 conventional fire alarm system. The panel was located in an electrical room. The system likely did code 3 in alarm.

Notification Appliances

The notification appliances were a mix of mostly Edwards 439D-6AWC (6", Vibrating) bells with some replacement Mircom BL-6B (6", motorized) bells. Value Village had Edwards "Durabel" 6100D vibrating bells (10" gong).

Initiating Devices

Pull Stations

All pull stations were Mircom MS-401 (single action, conventional) pull stations.

Automatic Detection Devices

Most noticed were Mircom C2W-BA (photo, smoke) (System Sensor Rebrand) which is odd because they were not released until sometime after 2000.

@@ Line 5: / Line 5: @@
 |
 |-
-| FACP: Notifier ONYX, unknown model <br />System Type: Addressable <br /> System Line Voltage: 120VAC<br />NAC Voltage:24VDC<br />Date of last known Upgrade: 2021<br />Year Opened: 1979
+| FACP: Notifier NFS-320C <br />System Type: Addressable <br /> System Line Voltage: 120VAC<br />NAC Voltage:24VDC<br />Date of last known Upgrade: 2021<br />Year Opened: 1979
 |}
 '''Midnapore Mall''' is a strip mall in Midnapore, Calgary built in 1979 as an indoor shopping mall. In 2000 the building was converted to a strip-type mall. The system just recently underwent a complete overhaul and there are no original devices left.
 ==System Specifications==
 ===FACP===
-The panel is likely either a Notifier NFS-320C or NFS2-640C installed in 2021. It is located in an electrical room inside the professional building.
+The building is protected by a Notifier NFS-320C addressable fire alarm system.  The panel is located in an electrical room.  The system runs Notifier's FlashScan addressable protocol, and does code 3 in alarm.
 ====Notification Appliances====
-The notification appliances are System Sensor "L-Series" P2RLA (red, 2-wire, bilingual, wall) horn-strobes installed throughout each space.
+All notification appliances are System Sensor "L-Series" P2RLA horn/strobes (red, wall-mount, bilingual).
 ===Initiating Devices===
 ====Pull Stations====
-The pull stations are all Notifier N-MPS-SA addressable single-action pull stations.
+All pull stations are Notifier N-MPS-SA addressable single-action pull stations.
 ====Automatic Detection Devices====
-None were identified during the last visit but should be present. As the old system had them.
+There are Notifier FSP-951A addressable photoelectric smoke detectors throughout the building.
@@ Line 30: / Line 30: @@
 |}
 ===FACP===
-The panel was a Mircom FA-1000 installed in a Professional Building electrical room. Possibly installed during the 2000 conversion.
+The building was protected by a Mircom Series 1000 conventional fire alarm system.  The panel was located in an electrical room.  The system likely did code 3 in alarm.
 ====Notification Appliances====
-The notification appliances were a mix of mostly Edwards 439D-6AWC (6", Vibrating) bells with some replacement Mircom BL-6B (6", motorized) bells throughout.
+The notification appliances were a mix of mostly Edwards 439D-6AWC (6", Vibrating) bells with some replacement Mircom BL-6B (6", motorized) bells.  Value Village had Edwards "Durabel" 6100D vibrating bells (10" gong).
 ===Initiating Devices===
 ====Pull Stations====
-The pull stations were all Mircom MS-401 (single action, conventional) pull stations.
+All pull stations were Mircom MS-401 (single action, conventional) pull stations.
 ====Automatic Detection Devices====
 Most noticed were Mircom C2W-BA (photo, smoke) (System Sensor Rebrand) which is odd because they were not released until sometime after 2000.