Canadian Tire (Dalhousie): Difference between revisions

Revision as of 13:55, 18 November 2022

System Specifications

FACP: Kidde VS4 System Type: Hybrid System Line Voltage: 120VAC NAC Voltage: 24VFWR Date of last known Upgrade: 2020 Year Opened: 1982

Canadian Tire is a retail store chain in Canada. This particular store is located at 5404 Dalton Drive, in Calgary, Alberta, Canada. The building is from 1982, and the fire alarm system was replaced in the 2000s.

System Specifications (1990s/2020-present)

FACP

The building is protected by a Kidde VS4 conventional fire alarm system. The panel is located in the automotive entrance vestibule. The system coding is likely temporal. This panel was installed in 2020 as a replacement for the previous panel, likely an Edwards 6632.

Notification Appliances

Most notification appliances are Edwards 439D-10AWC vibrating bells (10" gong) with Wheelock "Exceder" LSTW3-N remote strobes (white, wall-mount, no marking, set to 15cd. Aisle 41 has an Edwards 439D-10AWC vibrating bell (10" gong) mounted on a Wheelock RSSP-2415W strobe plate (15cd). One area has a Mircom "Select-A-Strobe" FS-240R remote strobe (red, wall-mount, 15cd) as a deficiency replacement. Near the checkout, there are two replacement bells: a Mircom BL-6B motor bell (6" gong) and a Mircom BL-10B motor bell (10" gong). Both were installed as deficiency replacements.

Pull Stations

All pull stations are Edwards 270-SPO conventional single-action pull stations.

Automatic Detection Devices

None noticed.

@@ Line 7: / Line 7: @@
 | FACP: Kidde VS4 <br />System Type: Hybrid <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />Date of last known Upgrade: 2020 <br />Year Opened: 1982
 |}
+'''Canadian Tire''' is a retail store chain in Canada. This particular store is located at 5404 Dalton Drive, in Calgary, Alberta, Canada.  The building is from 1982, and the fire alarm system was replaced in the 2000s.
-'''Canadian Tire''' is a retail store chain in Canada. This location is in Dalhousie, NW Calgary. The building is from 1982, but nothing is original. The panel was replaced in September 2020, along with all the strobes, except for only a few.
 == System Specifications (1990s/2020-present) ==
 ==== FACP ====
+The building is protected by a Kidde VS4 conventional fire alarm system.  The panel is located in the automotive entrance vestibule.  The system coding is likely temporal.  This panel was installed in 2020 as a replacement for the previous panel, likely an Edwards 6632.
-The store is protected by a Kidde VS4 addressable fire alarm system. The panel is located in the automotive entrance, and although the system is addressable, the system is set up in a non-addressable manner. The panel was installed in 2020, replacing an EST ESA2000 or 6632. The permit issued was "Fire Alarm System Modification - Replace fire alarm control panel."
 ==== Notification Appliances ====
+Most notification appliances are Edwards 439D-10AWC vibrating bells (10" gong) with Wheelock "Exceder" LSTW3-N remote strobes (white, wall-mount, no marking, set to 15cd.  Aisle 41 has an Edwards 439D-10AWC vibrating bell (10" gong) mounted on a Wheelock RSSP-2415W strobe plate (15cd).  One area has a Mircom "Select-A-Strobe" FS-240R remote strobe (red, wall-mount, 15cd) as a deficiency replacement.  Near the checkout, there are two replacement bells: a Mircom BL-6B motor bell (6" gong) and a Mircom BL-10B motor bell (10" gong).  Both were installed as deficiency replacements.
-The main notification appliances are Edwards 439D-10AWC vibrating bells with Wheelock "Exceder LED3" LSTW3-N (white, wall, no FIRE) LED remote strobes under them, or beside them for exits. The strobes replaced EST "Integrity" 202-5A-T remote strobes or EST "Integrity" 403-5A-R strobe plates in 2020 when the VS4 was installed, however the bells were kept. There is one Mircom FS-240R remote strobe under an Edwards 439D-10AWC that was replaced prior to the VS4 due to an Integrity strobe no longer working, and it is still installed and it is near the open ceiling part. In aisle 41, there is an Edwards 439D-10AWC bell on a Wheelock RSSP-2415W strobe plate. Two Edwards bells have broke down, one was replaced with a Mircom BL-10B motor bell, and the other with a Mircom BL-6B motor bell, respectively. The Mircom bells can be found near the aisle closest to the cashiers.
-=== Initiating Devices ===
 ==== Pull Stations ====
+All pull stations are Edwards 270-SPO conventional single-action pull stations.
-The pull stations are 1990s-2000s Edwards 270-SPO conventional pull stations, kept from the previous system. At one of the exits in the back, there is a brand new Edwards 270-SPO.
 ==== Automatic Detection Devices ====
 None noticed.