Toggle search
Toggle menu
129
57
47
11K
FireAlarmPedia
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Lake Louise Visitor Centre: Difference between revisions

From FireAlarmPedia
More actions
VisualWikitext
No edit summary
(Overhauled - the building that went through THREE fire alarm systems in 4 years!)
Line 5: Line 5:
|  
|  
|-
|-
| FACP: Notifier NFS-320C? <br />System Type: Addressable (Hybrid Manner) <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br />Date of last known Upgrade: 2018-2019 <br />Year Opened: 1990s
| FACP: Siemens Cerberus Pro
|}
FACP Location: Unknown<br />System Type: Hybrid-Addressable<br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VDC  


'''Lake Louise Visitor Centre''' is the visitor centre in Lake Louise, AB. It was built around the 1990s, and recently went under a renovation from October 2018 to August 2019. The current fire alarm system was installed during the renovation.
System Coding: Temporal


== System Specifications (2019-present) ==
Strobes Synchronized: Yes, Siemens<br />Date of last known Upgrade: 2018-2019 <br />Year Opened: 1990s
|}
'''Lake Louise Visitor Centre''' is the visitor centre located at 201 Village Road, Lake Louise, AB. It is the main tourist hub for lake louise. It was built around the 1990s, and recently went under a renovation from 2018-19. The system was installed in 2021.
==System Specifications (2021-present) ==
====FACP====
The building is protected by a Siemens Cerberus Pro hybrid-addressable fire alarm system. The panel location is unknown. The system runs Siemens’ FirePrint addressable protocol, and the system coding is temporal.
=====Annunciators=====
There is a Siemens annunciator at the main entrance, model unknown.
====Notification Appliances====
All notification appliances are Siemens ZH-MC-R-B horn/strobes (red, wall-mount, set to 15cd)).
===Initiating Devices===
====Pull Stations====
All pull stations are Siemens M61-B conventional single-action pull stations.
==== Automatic Detection Devices ====
There are Siemens HFP-11 addressable multisensor smoke/heat detectors throughout the building.


==== FACP ====


The building is likely protected by a Notifier NFS-320C fire alarm system. The panel is not visible, but is assumed due to the size of the building and the year it was renovated. It was installed during the renovation. It replaced an Edwards system of some sort, which could have been original.
==System Specifications (2019-2021)==
{| style="float:right;border:2px solid black"
|-
!Former System Specifications
|-
|
|-
|FACP: Notifier NFS-320C
FACP Location: Unknown<br />System Type: Conventional<br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VDC


==== Notification Appliances ====
System Coding: Temporal <br /> Strobes Synchronized: Yes, SS <br />Date of last known Upgrade: N/A <br />Year Decomissioned: 2021
 
|}
The notification appliances are System Sensor "L-Series" P2WLA (white, wall mount, 2-wire, English/French lettering) horn/strobes, set to 15cd and 30cd depending on location. They were probably chosen to blend in with the walls, and were installed during the renovations. However, in the men's washroom, remains a now-disconnected Edwards 439D-6AWC vibrating bell, left over from the previous system.
==== FACP====
 
The building was likely protected by a Notifier NFS-320C conventional fire alarm system. The panel location was unknown, but was assumed due to the size of the building. It was installed following the renovation. The system coding was temporal.
 
====Notification Appliances====
=== Initiating Devices ===
All notification appliances were System Sensor "L-Series" P2WLA (white, wall mount, 2-wire, English/French lettering) horn/strobes, set to 15cd and 30cd depending on location. These were probably chosen to blend in with the walls. However, in the men's washroom, there was a disconnected Edwards 439D-6AWC vibrating bell (6" gong), left over from the previous system.
 
==== Pull Stations ====
 
The pull stations are Notifier MPS-950B which were installed during the renovation.


==== Automatic Detection Devices ====


===Initiating Devices===
====Pull Stations====
All pull stations were Notifier MPS-950B conventional pull stations.
====Automatic Detection Devices====
None noticed.  
None noticed.  
{| style="float:right;border:2px solid black"
{| style="float:right;border:2px solid black"
|-
|-
! Former System Specifications
!Former System Specifications
|-
|-
|  
|
|-
|-
| FACP: Presumably EST2 or similar <br />System Type: Conventional/Hybrid <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VDC or 24VFWR, depending on what was there <br />Date of last known Upgrade: N/A <br />Year Decomissioned: 2018
|FACP: Presumably Edwards EST2
FACP Location: Unknown<br />System Type: Conventional<br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VDC or 24VFWR, depending on FACP
 
System Coding: Continuous<br />Date of last known Upgrade: N/A <br />Year Decomissioned: 2018
|}
|}
==Former System Specifications (1990s-2018)==
NOTE: This information was sourced from photos. This section should not be used for official purposes.


== Former System Specifications (1990s-2018) ==
====FACP====
 
The building was previously protected by an Edwards/EST conventional fire alarm system. It is unknown what the panel was as this is based off of photos. The system coding was continuous.
==== FACP ====
====Notification Appliances====
 
The main notification appliances were Edwards 439D-10AWC vibrating bells (10" gong). In the washrooms, there were Edwards 439D-6AWC vibrating bells (6" gong).
The building was previously protected by some Edwards or EST fire alarm system. It is unknown what the panel was as this is based off of photos.  
===Initiating Devices===
 
====Pull Stations====
==== Notification Appliances ====
All pull stations were Edwards 270-SPO conventional pull stations.
 
====Automatic Detection Devices====
The main notification appliances were Edwards 439D-10AWC vibrating bells. In the washrooms, there were (and still are, but disconnected) Edwards 439D-6AWC vibrating bells.
 
=== Initiating Devices ===
 
==== Pull Stations ====
 
The pull stations were Edwards 270-SPO pull stations.
 
==== Automatic Detection Devices ====
 
Not Available.
Not Available.
[[Category:Facilities]]
[[Category:Facilities]]

Revision as of 00:54, 18 December 2023

System Specifications
FACP: Siemens Cerberus Pro

FACP Location: Unknown
System Type: Hybrid-Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC

System Coding: Temporal

Strobes Synchronized: Yes, Siemens
Date of last known Upgrade: 2018-2019
Year Opened: 1990s

Lake Louise Visitor Centre is the visitor centre located at 201 Village Road, Lake Louise, AB. It is the main tourist hub for lake louise. It was built around the 1990s, and recently went under a renovation from 2018-19. The system was installed in 2021.

System Specifications (2021-present)

FACP

The building is protected by a Siemens Cerberus Pro hybrid-addressable fire alarm system. The panel location is unknown. The system runs Siemens’ FirePrint addressable protocol, and the system coding is temporal.

Annunciators

There is a Siemens annunciator at the main entrance, model unknown.

Notification Appliances

All notification appliances are Siemens ZH-MC-R-B horn/strobes (red, wall-mount, set to 15cd)).

Initiating Devices

Pull Stations

All pull stations are Siemens M61-B conventional single-action pull stations.

Automatic Detection Devices

There are Siemens HFP-11 addressable multisensor smoke/heat detectors throughout the building.


System Specifications (2019-2021)

Former System Specifications
FACP: Notifier NFS-320C

FACP Location: Unknown
System Type: Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VDC

System Coding: Temporal
Strobes Synchronized: Yes, SS
Date of last known Upgrade: N/A
Year Decomissioned: 2021

FACP

The building was likely protected by a Notifier NFS-320C conventional fire alarm system. The panel location was unknown, but was assumed due to the size of the building. It was installed following the renovation. The system coding was temporal.

Notification Appliances

All notification appliances were System Sensor "L-Series" P2WLA (white, wall mount, 2-wire, English/French lettering) horn/strobes, set to 15cd and 30cd depending on location. These were probably chosen to blend in with the walls. However, in the men's washroom, there was a disconnected Edwards 439D-6AWC vibrating bell (6" gong), left over from the previous system.


Initiating Devices

Pull Stations

All pull stations were Notifier MPS-950B conventional pull stations.

Automatic Detection Devices

None noticed.

Former System Specifications
FACP: Presumably Edwards EST2

FACP Location: Unknown
System Type: Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VDC or 24VFWR, depending on FACP

System Coding: Continuous
Date of last known Upgrade: N/A
Year Decomissioned: 2018

Former System Specifications (1990s-2018)

NOTE: This information was sourced from photos. This section should not be used for official purposes.

FACP

The building was previously protected by an Edwards/EST conventional fire alarm system. It is unknown what the panel was as this is based off of photos. The system coding was continuous.

Notification Appliances

The main notification appliances were Edwards 439D-10AWC vibrating bells (10" gong). In the washrooms, there were Edwards 439D-6AWC vibrating bells (6" gong).

Initiating Devices

Pull Stations

All pull stations were Edwards 270-SPO conventional pull stations.

Automatic Detection Devices

Not Available.

Retrieved from "https://firealarmpedia.org/index.php?title=Lake_Louise_Visitor_Centre&oldid=6510"
Last modified
This page was last edited on 18 December 2023, at 00:54.