Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

1291 Gordon St, Guelph: Difference between revisions

From FireAlarmPedia
No edit summary
No edit summary
 
Line 5: Line 5:
|  
|  
|-
|-
| FACP: Mircom FX-2000 <br />FACP Location: Electrical Room? <br />System Type: Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />System Coding: Temporal? <br />Date of last known Upgrade: N/A <br />Year Opened: 2015
| FACP: Mircom FX-2000 <br />FACP Location: Electrical Room? <br />System Type: Single-Stage Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />System Coding: Temporal? <br /> Strobes Synchronized: N/A <br>Date of last known Upgrade: N/A <br />Year Opened: 2015
|}
|}
'''1291 Gordon St''' is the address given to a 3-story apartment building in Guelph, Ontario. It was built in 2015, and the fire alarm system is original.  
'''1291 Gordon St''' is the address given to a 3-story apartment building in Guelph, Ontario. It was built in 2015, and the fire alarm system is original.  
Line 17: Line 17:
All pull stations are Mircom MS-401AD addressable single-action pull stations.
All pull stations are Mircom MS-401AD addressable single-action pull stations.
==== Automatic Detection Devices ====
==== Automatic Detection Devices ====
There are Mircom MIX-2251BA addressable photoelectric smoke detectors throughout, mounted on System Sensor B710LPA bases.
There are Mircom MIX-2251BA addressable photoelectric smoke detectors throughout, mounted on System Sensor B210LPA bases.
==== Modules ====
==== Modules ====
There are Mircom MIX-M501MA addressable monitor modules supervising the sprinkler system’s tamper and flow switches.
There are Mircom MIX-M500MA addressable monitor modules supervising the sprinkler system’s tamper and flow switches.  <br>There are System Sensor M500XA isolator modules on the SLC.
 
==== EOLs ====
There are Mircom MP-300 end of line resistor plates on all sprinkler and signal circuits.
[[Category:Residential]]
[[Category:Residential]]

Latest revision as of 10:58, 19 August 2024

System Specifications
FACP: Mircom FX-2000
FACP Location: Electrical Room?
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal?
Strobes Synchronized: N/A
Date of last known Upgrade: N/A
Year Opened: 2015

1291 Gordon St is the address given to a 3-story apartment building in Guelph, Ontario. It was built in 2015, and the fire alarm system is original.

System Specifications (2015-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is likely located in an electrical room. The system runs Mircom’s CLIP addressable protocol, and the system coding is likely temporal.

Notification Appliances[edit | edit source]

All notification appliances are Mircom MH-25R mini-horns (red). These are also in units.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Mircom MS-401AD addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

There are Mircom MIX-2251BA addressable photoelectric smoke detectors throughout, mounted on System Sensor B210LPA bases.

Modules[edit | edit source]

There are Mircom MIX-M500MA addressable monitor modules supervising the sprinkler system’s tamper and flow switches.
There are System Sensor M500XA isolator modules on the SLC.

EOLs[edit | edit source]

There are Mircom MP-300 end of line resistor plates on all sprinkler and signal circuits.