Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Palliser One: Difference between revisions

From FireAlarmPedia
No edit summary
No edit summary
 
Line 18: Line 18:
====Automatic Detection Devices====
====Automatic Detection Devices====
There are EST SIGA-PS addressable photoelectric smoke detectors throughout the building, mounted on EST SIGA-SB bases. Some areas have EST SIGA2-PS addressable photoelectric smoke detectors as deficiency replacements, also mounted on EST SIGA-SB bases.
There are EST SIGA-PS addressable photoelectric smoke detectors throughout the building, mounted on EST SIGA-SB bases. Some areas have EST SIGA2-PS addressable photoelectric smoke detectors as deficiency replacements, also mounted on EST SIGA-SB bases.
==== Modules ====
There are EST SIGA-CT1 addressable monitor modules supervising the sprinkler system's tamper and flow switches.
==== EOLs ====
There are Edwards EOL-P1 end of line resistor plates on all sprinkler and signal circuits.
[[Category:Facilities]]
[[Category:Facilities]]
[[Category:Calgary]]
[[Category:Calgary]]
[[Category:Commercial/Residential]]
[[Category:Commercial/Residential]]

Latest revision as of 19:48, 9 October 2024

System Specifications
FACP: Edwards EST3
FACP Location: CACF Room?
System Type: Two Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 70.7VRMS (Audible)
24VDC (Visual)
System Coding: 20BPM Tone (Alert)
Temporal? Tone (Alarm)
Strobes Synchronized: Unknown
Date of last known Upgrade: 2018
Year Opened: 1970

Palliser One is an office building located at 125 9 Avenue Southeast, in Calgary, Alberta, Canada. The tower is currently undergoing a partial conversion, which will see 11 of the 27 floors converted into 176 apartments. The tower opened in 1970, and the current fire alarm system was installed in the 2000s. No information is known about the fire alarm system prior to the 2000s.

System Specifications (2000s-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by an Edwards EST3 addressable fire alarm system. The system is networked, and the main node is likely located in a CACF room. The system runs Edwards’ Signature addressable protocol, and is equipped with voice evacuation. The system is configured for two-stage operation. The alert signal is a 20BPM tone, followed by either a 120BPM or temporal tone for the evacuation signal. There may also be voice messages, although this is unknown.

Notification Appliances[edit | edit source]

Most notification appliances are Edwards 965-3A-8RW speaker/strobes (white, ceiling-mount, 8” round, 30cd, 70V). Some areas have Edwards 965-1A-8RW remote speakers (white, ceiling-mount, 8” round, 70V) for additional sound coverage.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are EST SIGA-270P addressable two-stage single-action pull stations.

Automatic Detection Devices[edit | edit source]

There are EST SIGA-PS addressable photoelectric smoke detectors throughout the building, mounted on EST SIGA-SB bases. Some areas have EST SIGA2-PS addressable photoelectric smoke detectors as deficiency replacements, also mounted on EST SIGA-SB bases.

Modules[edit | edit source]

There are EST SIGA-CT1 addressable monitor modules supervising the sprinkler system's tamper and flow switches.

EOLs[edit | edit source]

There are Edwards EOL-P1 end of line resistor plates on all sprinkler and signal circuits.