Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Canadian Tire (Mill Woods Town Centre): Difference between revisions

From FireAlarmPedia
mNo edit summary
Line 21: Line 21:
None noticed, waterflow is present.
None noticed, waterflow is present.
==== Modules ====
==== Modules ====
There are EST SIGA-CT1 addressable monitor modules supervising the sprinkler system’s tamper and flow switches.
There are EST SIGA-WTM addressable monitor modules supervising the sprinkler system’s tamper and flow switches.


There is an EST SIGA-CR relay module for tripping the mall's fire alarm system.
There is an EST SIGA-CR relay module for tripping the mall's fire alarm system.
==== EOLs ====
==== EOLs ====
There are Edwards EOL-P1 end-of-line resistors on all signal and sprinkler circuits.
There are Edwards EOL-P1 end-of-line resistors on all signal and sprinkler circuits.
[[Category:Edmonton]]
[[Category:Edmonton]]
[[Category:Retail Stores]]
[[Category:Retail Stores]]

Revision as of 17:19, 28 July 2024

System Specifications
FACP: Edwards EST2
FACP Location: Automotive Entrance
System Type: Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: 20BPM (Alert)
Continuous (Alarm)
Strobes Synchronized: Yes, self-sync
Date of last known Upgrade: 2010s
Year Opened: 1999

Canadian Tire is a Canadian hardware/auto parts store chain. This particular location is located at #400 2331 66 St NW, Edmonton, AB in the Mill Woods Town Centre. This store was originally built in 1988 as Kmart, and was renovated in 1999 to become Canadian Tire. The fire alarm system was installed during the renovation, with parts replaced as deficiencies occur. This system is tied into the mall’s fire alarm system.

System Specifications (1999-present)

FACP

The store is protected by an Edwards EST2 addressable fire alarm system. The panel is located in the automotive entrance vestibule. The system runs Edwards’ Signature addressable protocol, and is configured for two-stage operation. The alert signal coding is 20BPM, followed by continuous for the evacuation signal. This and the mall's system will trip each other when one goes into alarm. When either system is sounding the evacuation signal, the other will sound the alert signal.

Notification Appliances

Most notification appliances are General Signal MB10-24 motor bells (10” gong) on EST “Integrity” 403-7A-R strobe plates (15/75cd). Most of the strobe plates are original, and there are a few newer ones as deficiency replacements; the bells remain.

There is an Edwards MB10-24 motor bell (10” gong) by aisle 90 as a deficiency replacement; the original strobe plate remains.

Initiating Devices

Pull Stations

All pull stations are first-generation EST SIGA-270P addressable two-stage pull stations.

Automatic Detection Devices

None noticed, waterflow is present.

Modules

There are EST SIGA-WTM addressable monitor modules supervising the sprinkler system’s tamper and flow switches.

There is an EST SIGA-CR relay module for tripping the mall's fire alarm system.

EOLs

There are Edwards EOL-P1 end-of-line resistors on all signal and sprinkler circuits.