More actions
(Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Mircom FX-2000 <br />FACP Location: Main Entrance Vestibule <br />System Type: Addres...") |
No edit summary |
||
| Line 5: | Line 5: | ||
| | | | ||
|- | |- | ||
| FACP: Mircom FX-2000 <br />FACP Location: Main Entrance Vestibule <br />System Type: Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />System Coding: Temporal <br>Strobes Synchronized: No <br />Date of last known Upgrade: 2015 <br />Year Opened: 1970 | | FACP: Mircom FX-2000 <br />FACP Location: Main Entrance Vestibule <br />System Type: Single-Stage Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />System Coding: Temporal <br>Strobes Synchronized: No <br />Date of last known Upgrade: 2015 <br />Year Opened: 1970 | ||
|} | |} | ||
'''Brentview Tower''' is a 14-story apartment building located at 3524 31 St NW, Calgary, Alberta. It is located adjacent to [[Boardwalk Retirement Community]]. It was built in 1970, and the fire alarm system was upgraded in 2005, and then 2015. | '''Brentview Tower''' is a 14-story apartment building located at 3524 31 St NW, Calgary, Alberta. It is located adjacent to [[Boardwalk Retirement Community]]. It was built in 1970, and the fire alarm system was upgraded in 2005, and then 2015. | ||
== System Specifications (2015-present) == | == System Specifications (2015-present) == | ||
==== FACP ==== | ==== FACP ==== | ||
The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Mircom’s CLIP addressable protocol, and the system coding is temporal. | The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Mircom’s CLIP addressable protocol, and the system coding is temporal. | ||
==== Notification Appliances ==== | ==== Notification Appliances ==== | ||
All audible notification appliances are Wheelock MB-G10-24 motor bells (10” gong), mounted on Wheelock RSSP-2415W strobe plates (15cd) except for one. <br> One bell is mounted on an Amseco RSB24-153075 strobe plate (red, set to 75cd) as a deficiency replacement. | All audible notification appliances are Wheelock MB-G10-24 motor bells (10” gong), mounted on Wheelock RSSP-2415W strobe plates (15cd) except for one. <br> One bell is mounted on an Amseco RSB24-153075 strobe plate (red, set to 75cd) as a deficiency replacement. | ||
=== Initiating Devices === | === Initiating Devices === | ||
==== Pull Stations ==== | ==== Pull Stations ==== | ||
All pull stations are Mircom MS-401AD addressable single-action pull stations. | All pull stations are Mircom MS-401AD addressable single-action pull stations. | ||
==== Automatic Detection Devices ==== | ==== Automatic Detection Devices ==== | ||
There are Mircom MIX-2251APA addressable photoelectric smoke detectors throughout the building. <br> The garbage chute rooms, mechanical/electrical rooms and other similar areas have Mircom MIX-5251RAPA addressable 135°F fixed/rate-of-rise heat detectors. <br> All detectors are mounted on System Sensor B210LPA bases. | There are Mircom MIX-2251APA addressable photoelectric smoke detectors throughout the building. <br> The garbage chute rooms, mechanical/electrical rooms and other similar areas have Mircom MIX-5251RAPA addressable 135°F fixed/rate-of-rise heat detectors. <br> All detectors are mounted on System Sensor B210LPA bases. | ||
==== Modules ==== | |||
There are Mircom MIX-M500RAPA addressable monitor modules supervising the sprinkler system's flow switches. | |||
There are System Sensor M500XA isolator modules on the SLC. | |||
Mircom | ==== EOLs ==== | ||
There are Mircom MP-300 end of line resistor plates on all sprinkler and signal circuits. | |||
[[Category:Calgary]] | |||
[[Category:Residential]] | |||
Latest revision as of 16:44, 8 September 2024
| System Specifications |
|---|
| FACP: Mircom FX-2000 FACP Location: Main Entrance Vestibule System Type: Single-Stage Addressable System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Temporal Strobes Synchronized: No Date of last known Upgrade: 2015 Year Opened: 1970 |
Brentview Tower is a 14-story apartment building located at 3524 31 St NW, Calgary, Alberta. It is located adjacent to Boardwalk Retirement Community. It was built in 1970, and the fire alarm system was upgraded in 2005, and then 2015.
System Specifications (2015-present)[edit | edit source]
FACP[edit | edit source]
The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Mircom’s CLIP addressable protocol, and the system coding is temporal.
Notification Appliances[edit | edit source]
All audible notification appliances are Wheelock MB-G10-24 motor bells (10” gong), mounted on Wheelock RSSP-2415W strobe plates (15cd) except for one.
One bell is mounted on an Amseco RSB24-153075 strobe plate (red, set to 75cd) as a deficiency replacement.
Initiating Devices[edit | edit source]
Pull Stations[edit | edit source]
All pull stations are Mircom MS-401AD addressable single-action pull stations.
Automatic Detection Devices[edit | edit source]
There are Mircom MIX-2251APA addressable photoelectric smoke detectors throughout the building.
The garbage chute rooms, mechanical/electrical rooms and other similar areas have Mircom MIX-5251RAPA addressable 135°F fixed/rate-of-rise heat detectors.
All detectors are mounted on System Sensor B210LPA bases.
Modules[edit | edit source]
There are Mircom MIX-M500RAPA addressable monitor modules supervising the sprinkler system's flow switches.
There are System Sensor M500XA isolator modules on the SLC.
EOLs[edit | edit source]
There are Mircom MP-300 end of line resistor plates on all sprinkler and signal circuits.