More actions
(Created page with " {| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Notifier AFP-200 <br />FACP Location: Main Entrance Vestibule <br />System Type: Add...") |
No edit summary |
||
| Line 5: | Line 5: | ||
| | | | ||
|- | |- | ||
| FACP: Notifier AFP-200 <br />FACP Location: Main Entrance Vestibule <br />System Type: Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br />System Coding: Continuous <br>Strobes Synchronized: No <br />Date of last known Upgrade: N/A <br />Year Opened: 1999 | | FACP: Notifier AFP-200 <br />FACP Location: Main Entrance Vestibule <br />System Type: Single-Stage Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br />System Coding: Continuous <br>Strobes Synchronized: No <br />Date of last known Upgrade: N/A <br />Year Opened: 1999 | ||
|} | |} | ||
The '''Calgary Research Park''' is a large laboratory and research facility located at 3608 33 Street NW, in Calgary, Alberta, Canada. The facility is owned by the Alberta provincial government. The building was built in 1999, and the fire alarm system is original, with replacement devices installed as deficiencies occur. | |||
The '''Calgary Research Park''' is a large laboratory and research facility located at 3608 33 Street NW, in Calgary, Alberta, Canada. | |||
==System Specifications== | ==System Specifications== | ||
====FACP==== | ====FACP==== | ||
The building is protected by a Notifier AFP-200 addressable fire alarm system. | The building is protected by a Notifier AFP-200 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Notifier’s CLIP addressable protocol, and the system coding is continuous. | ||
====Notification Appliances==== | ====Notification Appliances==== | ||
Most notification appliances are System Sensor “Multi-Alert” MA/SS24MA sounder strobes (red, wall-mount, 15cd, set to 800Hz). | Most notification appliances are System Sensor “Multi-Alert” MA/SS24MA sounder strobes (red, wall-mount, 15cd, set to 800Hz). <br>Some areas have System Sensor “SpectrAlert” P2415A horn/strobes (red, wall-mount, 15cd). <br>Some areas have Mircom “Select-A-Horn/Strobe” FHS-340R horn/strobes (red, wall-mount, set to electromechanical/15cd) as deficiency replacements. <br>One corridor has a Mircom FHS-240R horn/strobe (red, wall-mount, set to electromechanical/15cd) as a deficiency replacement. | ||
===Initiating Devices=== | ===Initiating Devices=== | ||
====Pull Stations==== | ====Pull Stations==== | ||
Most pull stations are Notifier NFM-950B conventional single-action pull stations. | Most pull stations are Notifier NFM-950B conventional single-action pull stations. <br>Some areas have Simplex MS-301C and Notifier MPS-950B conventional single-action pull stations as deficiency replacements. <br>All aforementioned stations have Notifier MMX-101A addressable monitor modules attached to them. <br>Some areas have Notifier NBG-12LX addressable dual-action pull stations as recent deficiency replacements. | ||
====Automatic Detection Devices==== | ====Automatic Detection Devices==== | ||
There are Notifier FSP-851A addressable photoelectric smoke detectors in some areas, such as the main atrium and in all stairwells. | There are Notifier FSP-851A addressable photoelectric smoke detectors in some areas, such as the main atrium and in all stairwells. <br>Some areas have Notifier CPX-551A addressable ionization smoke detectors. <br>All CPX-series and some FSP-series detectors are mounted on Notifier BX501 bases. <br>Some FSP-series detectors are mounted on System Sensor B210LPA bases. <br>There is an FDD CR-135-EWP conventional explosion-proof 135°F fixed-temperature/rate-of-rise heat detector in the corrosive storage area, wired to a Notifier FDM-1A addressable dual-input monitor module. | ||
====Modules==== | ====Modules==== | ||
There are Notifier MMX-1A addressable monitor modules supervising the sprinkler system’s tamper and flow switches. | There are Notifier MMX-1A addressable monitor modules supervising the sprinkler system’s tamper and flow switches. <br>There are Notifier CMX-1A addressable relay modules for AHU shutdown. | ||
====EOLs==== | ====EOLs==== | ||
There are Notifier EOL-CR end of line resistor plates on all sprinkler and signal circuits. | There are Notifier EOL-CR end of line resistor plates on all sprinkler and signal circuits. | ||
[[Category:Calgary]] | [[Category:Calgary]] | ||
[[Category:Research Facilities]] | [[Category:Research Facilities]] | ||
Latest revision as of 11:22, 8 September 2024
| System Specifications |
|---|
| FACP: Notifier AFP-200 FACP Location: Main Entrance Vestibule System Type: Single-Stage Addressable System Line Voltage: 120VAC NAC Voltage: 24VDC System Coding: Continuous Strobes Synchronized: No Date of last known Upgrade: N/A Year Opened: 1999 |
The Calgary Research Park is a large laboratory and research facility located at 3608 33 Street NW, in Calgary, Alberta, Canada. The facility is owned by the Alberta provincial government. The building was built in 1999, and the fire alarm system is original, with replacement devices installed as deficiencies occur.
System Specifications[edit | edit source]
FACP[edit | edit source]
The building is protected by a Notifier AFP-200 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Notifier’s CLIP addressable protocol, and the system coding is continuous.
Notification Appliances[edit | edit source]
Most notification appliances are System Sensor “Multi-Alert” MA/SS24MA sounder strobes (red, wall-mount, 15cd, set to 800Hz).
Some areas have System Sensor “SpectrAlert” P2415A horn/strobes (red, wall-mount, 15cd).
Some areas have Mircom “Select-A-Horn/Strobe” FHS-340R horn/strobes (red, wall-mount, set to electromechanical/15cd) as deficiency replacements.
One corridor has a Mircom FHS-240R horn/strobe (red, wall-mount, set to electromechanical/15cd) as a deficiency replacement.
Initiating Devices[edit | edit source]
Pull Stations[edit | edit source]
Most pull stations are Notifier NFM-950B conventional single-action pull stations.
Some areas have Simplex MS-301C and Notifier MPS-950B conventional single-action pull stations as deficiency replacements.
All aforementioned stations have Notifier MMX-101A addressable monitor modules attached to them.
Some areas have Notifier NBG-12LX addressable dual-action pull stations as recent deficiency replacements.
Automatic Detection Devices[edit | edit source]
There are Notifier FSP-851A addressable photoelectric smoke detectors in some areas, such as the main atrium and in all stairwells.
Some areas have Notifier CPX-551A addressable ionization smoke detectors.
All CPX-series and some FSP-series detectors are mounted on Notifier BX501 bases.
Some FSP-series detectors are mounted on System Sensor B210LPA bases.
There is an FDD CR-135-EWP conventional explosion-proof 135°F fixed-temperature/rate-of-rise heat detector in the corrosive storage area, wired to a Notifier FDM-1A addressable dual-input monitor module.
Modules[edit | edit source]
There are Notifier MMX-1A addressable monitor modules supervising the sprinkler system’s tamper and flow switches.
There are Notifier CMX-1A addressable relay modules for AHU shutdown.
EOLs[edit | edit source]
There are Notifier EOL-CR end of line resistor plates on all sprinkler and signal circuits.