Corona Station: Difference between revisions

Revision as of 00:33, 26 August 2024

System Specifications

FACP: Simplex 4100ES? FACP Location: Unknown System Type: Addressable System Line Voltage: 120VAC NAC Voltage: 24VDC System Coding: Temporal Strobes Synchronized: Yes, SmartSync Date of last known Upgrade: 2010s Year Opened: 1983

Corona Station is a light rail train station located in Downtown Edmonton, Alberta, Canada. The station serves both the Capital Line and the Metro Line. The station opened in 1983, and the fire alarm system was upgraded in the 2010s.

System Specifications (2010s-present)

Please note that some system details are unconfirmed. This page should not be used for official purposes.

FACP

The building is protected by a Simplex 4100ES addressable fire alarm system. The panel location is unknown. The system runs Simplex’s IDNet addressable protocol, and the system coding is temporal.

Notification Appliances

All notification appliances but one are Simplex “TrueAlert” 4906-9127 horn/strobes (red, wall-mount, set to 15cd).

There is one Simplex 4906-9128 horn/strobe (red, ceiling-mount, set to 15cd) as a deficiency replacement.

Initiating Devices

Pull Stations

All pull stations are Simplex 4099-9004 addressable single-action pull stations.

Automatic Detection Devices

None noticed.

Modules

There are Simplex 4090-9001 addressable monitor modules supervising the sprinkler system’s tamper and flow switches.

EOLs

There are Simplex 2081-9040C end of line resistor plates on all sprinkler and signal circuits.

@@ Line 7: / Line 7: @@
 | FACP: Simplex 4100ES? <br />FACP Location: Unknown <br />System Type: Addressable<br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br />System Coding: Temporal <br>Strobes Synchronized: Yes, SmartSync <br />Date of last known Upgrade: 2010s <br />Year Opened: 1983
 |}
+'''Corona Station''' is a light rail train station located in Downtown Edmonton, Alberta, Canada. The station serves both the Capital Line and the Metro Line. The station opened in 1983, and the fire alarm system was upgraded in the 2010s.
-'''Corona Station''' is a light rail train station located in Downtown Edmonton, Alberta, Canada.  The station serves both the Capital Line and the Metro Line.  The station opened in 1983, and the fire alarm system was upgraded in the 2010s.
 ==System Specifications (2010s-present)==
-Please note that some system details are unconfirmed.  This page should not be used for official purposes.
+Please note that some system details are unconfirmed. This page should not be used for official purposes.
 ====FACP====
-The building is protected by a Simplex 4100ES addressable fire alarm system.  The panel location is unknown.  The system runs Simplex’s IDNet addressable protocol, and the system coding is temporal.
+The building is protected by a Simplex 4100ES addressable fire alarm system. The panel location is unknown. The system runs Simplex’s IDNet addressable protocol, and the system coding is temporal.
 ====Notification Appliances====
-All notification appliances are Simplex “TrueAlert” 4906-9127 horn/strobes (red, wall-mount, set to 15cd).
+All notification appliances but one are Simplex “TrueAlert” 4906-9127 horn/strobes (red, wall-mount, set to 15cd).
+There is one Simplex 4906-9128 horn/strobe (red, ceiling-mount, set to 15cd) as a deficiency replacement.
 ===Initiating Devices===
 ====Pull Stations====
 All pull stations are Simplex 4099-9004 addressable single-action pull stations.
 ====Automatic Detection Devices====
 None noticed.
 ====Modules====
 There are Simplex 4090-9001 addressable monitor modules supervising the sprinkler system’s tamper and flow switches.
 ====EOLs====
 There are Simplex 2081-9040C end of line resistor plates on all sprinkler and signal circuits.
 [[Category:Edmonton]]
 [[Category:Train Stations]]