Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

710-720 12024 Sarcee Trail NW, Calgary: Difference between revisions

From FireAlarmPedia
(Repaired infobox.)
m (TwentyThree33 moved page 710-720 12024 Sarcee Trail NW to 710-720 12024 Sarcee Trail NW, Calgary without leaving a redirect: Page was made prior to Fire Alarmpedia expanding beyond Calgary. Move is being done to avoid confusion with other cities.)
 
(No difference)

Latest revision as of 16:08, 7 September 2024

System Specifications
FACP: Mircom FX-2000
FACP Location: Goodwill Entrance
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Partially
Date of last known Upgrade: N/A
Year Opened: 2016

710-720 12024 Sarcee Trail NW is the address given to a small plaza in Calgary, Alberta, Canada. The plaza consists of a Goodwill store and a Staples. It was built in 2016 and has its original fire alarm system.

System Specifications[edit | edit source]

FACP[edit | edit source]

The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the Goodwill entrance vestibule. The system runs Mircom's CLIP addressable protocol, and the system coding is temporal.

Booster Panels[edit | edit source]

There is a Mircom INX-10A intelligent booster panel located next to the main FACP.

Notification Appliances[edit | edit source]

Goodwill[edit | edit source]

Most notification appliances are Mircom "Select-A-Horn/Strobe" FHS-340R horn/strobes (red, wall-mount, set to 15cd/broadband).

Some areas have System Sensor "SpectrAlert Advance" P2RA horn/strobes (red, wall-mount, set to 30cd).

For outdoor notification, there is a Mircom FHS-340R-WP weatherproof horn/strobe (red, wall-mount) outside the main entrance.

Staples[edit | edit source]

All notification appliances are Mircom "Select-A-Horn/Strobe" FHS-340R horn/strobes (red, wall-mount, set to 15cd/broadband).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Mircom MS-401AD addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

None noticed. There is a sprinkler system.

Modules[edit | edit source]

There are Mircom MIX-M500MA addressable monitor modules supervising the sprinkler system's tamper and flow switches.

EOLs[edit | edit source]

There are Mircom MP-300 end-of-line resistor plates on all sprinkler and signal circuits.