Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

AHS EMS Station 4: Difference between revisions

From FireAlarmPedia
(Gonna rename this page.)
m (TwentyThree33 moved page AHS EMS Station to AHS EMS Station 4 without leaving a redirect: Station is clearly named #4. Not sure why this page ever had the original name.)
 
(No difference)

Latest revision as of 10:44, 8 September 2024

System Specifications
FACP: Notifier NFS-320C
FACP Location: Main Entrance Vestibule
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Strobes Synchronized: Yes, System Sensor
Date of last known Upgrade: 2016
Year Opened: Late 1970s

Alberta Health Services is the governing body of health care services in the province of Alberta. This page will cover EMS Station #4, located at 16 Moncton Road Northeast, in Calgary, Alberta, Canada. The station opened in the late 1970s as a fire station, and was converted to an EMS station in the 1990s. The fire alarm system was fully upgraded in 2016.

System Specifications (2016-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by a Notifier NFS-320C addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Notifier’s FlashScan addressable protocol, and the system coding is temporal.

Notification Appliances[edit | edit source]

All notification appliances are System Sensor “SpectrAlert Advance” P2RA horn/strobes (red, wall-mount, set to 15cd).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Notifier NBG-12LX addressable dual-action pull stations.

Automatic Detection Devices[edit | edit source]

There are Notifier FSP-851A addressable photoelectric smoke detectors throughout the building, and a Notifier FST-851A addressable 135°F fixed-temperature heat detector in the kitchen. All detectors are mounted on System Sensor B210LPA bases.

EOLs[edit | edit source]

There are Notifier EOL-CR end of line resistor plates on all signal circuits.