Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Trail Appliances (Calgary South): Difference between revisions

From FireAlarmPedia
No edit summary
No edit summary
 
Line 6: Line 6:
|-
|-
| FACP: Vigilant VS1
| FACP: Vigilant VS1
FACP Location: Main Entrance<br />System Type: Addressable <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR  
FACP Location: Main Entrance<br />System Type: Single-Stage Addressable <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR  


System Coding: Temporal
System Coding: Temporal


Strobes Synchronized: No<br />Date of last known Upgrade: 2014 <br />Year Opened: 1986/2002
Strobes Synchronized: No<br />Date of last known Upgrade: 2014 <br />Year Opened: 1986/2004
|}
|}
'''Trail Appliances''' is a chain of appliance stores in Western Canada. This particular store is located at 6880 11 St SE, in the Deerfoot Meadows industrial area of Southeast Calgary. It opened in 1986 as a Costco, and became Trail Appliances in 2002 once Costco moved to its new location. The system was replaced in about 2014, but the horn/strobes from when it opened remain.
'''Trail Appliances''' is a chain of appliance stores in Western Canada. This particular store is located at 6880 11 St SE, in the Deerfoot Meadows industrial area of Southeast Calgary. It opened in 1986 as a Costco, and became Trail Appliances in 2004 once Costco moved to its new location. The system was replaced in about 2014, but the horn/strobes from when it opened remain.
==System Specifications (2014-present)==
==System Specifications (2014-present)==
====FACP====
====FACP====
The building is protected by a Vigilant VS1 addressable fire alarm system. The panel is located in the main entrance, and replaced a Notifier AFP-200 in about 2014. The system runs Vigilant's GSA addressable protocol, and the system coding is continuous; the notification appliances are self-coded.
The building is protected by a Vigilant VS1 addressable fire alarm system. The panel is located in the main entrance. The system runs Vigilant's GSA addressable protocol, and the system coding is continuous; the notification appliances are self-coded.
====Notification Appliances====
====Notification Appliances====
All notification appliances are System Sensor “SpectrAlert” P241575A horn/strobes (red, wall-mount, 15/75cd). These were installed when the building was converted, which was 2002, and were not replaced despite the upgrade. They are set on electromechanical, temporal.
All notification appliances are System Sensor “SpectrAlert” P241575A horn/strobes (red, wall-mount, 15/75cd, set to electromechanical) These were installed when the building was converted, and were not replaced despite the upgrade.
===Initiating Devices===
===Initiating Devices===
====Pull Stations====
====Pull Stations====
All pull stations are Vigilant GSA-M270 addressable single-action "teardrop" pull stations. These were installed in 2014.
All pull stations are Vigilant GSA-M270 addressable single-action "teardrop" pull stations.  
====Automatic Detection Devices====
====Automatic Detection Devices====
The sales floor is protected by a sprinkler system with waterflow detection, so there are no detectors visible.
The sales floor is protected by a sprinkler system with waterflow detection, so there are no detectors visible.
==== Modules ====
==== Modules ====
There are Vigilant GSA-MM1 addressable monitor modules supervising the sprinkler system's tamper and flow switches.
There are Vigilant GSA-MM1 addressable monitor modules supervising the sprinkler system's tamper and flow switches.
==== EOLs ====
There are Edwards EOL-P1 end-of-line resistor plates on all sprinkler and signal circuits.
== Former System Specifications (2004-2014) ==
{| style="float:right;border:2px solid black"
|-
! Former System Specifications
|-
|
|-
| FACP: Notifier AFP-200 <br />FACP Location: Main Entrance <br />System Type: Single-Stage Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br />System Coding: Temporal <br>Strobes Synchronized: No <br />Date of last known Upgrade: N/A <br/> Year Installed: 2004 <br />Year Decommissioned: 2014
|}
====FACP====
The building was protected by a Notifier AFP-200 addressable fire alarm system. The panel was located in the main entrance vestibule. The system ran Notifier's CLIP addressable protocol, and the system coding was temporal.
====Notification Appliances====
All notification appliances are System Sensor “SpectrAlert” P241575A horn/strobes (red, wall-mount, 15/75cd, set to electromechanical). These are still in use on the VS1.
===Initiating Devices===
====Pull Stations====
All pull stations were Notifier MPS-950B conventional single-action pull stations, wired to Notifier FMM-101A addressable monitor modules.
====Automatic Detection Devices====
The sales floor is protected by a sprinkler system with waterflow detection, so there are no detectors visible.
==== Modules ====
There were Notifier FMM-1A addressable monitor modules supervising the sprinkler system's tamper and flow switches.
==== EOLs ====
There were Notifier EOL-CR end-of-line resistor plates on all sprinkler and signal circuits.
[[Category:Facilities]]
[[Category:Facilities]]
[[Category:Retail Stores]]
[[Category:Retail Stores]]
[[Category:Calgary]]
[[Category:Calgary]]

Latest revision as of 17:43, 14 October 2024

System Specifications
FACP: Vigilant VS1

FACP Location: Main Entrance
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR

System Coding: Temporal

Strobes Synchronized: No
Date of last known Upgrade: 2014
Year Opened: 1986/2004

Trail Appliances is a chain of appliance stores in Western Canada. This particular store is located at 6880 11 St SE, in the Deerfoot Meadows industrial area of Southeast Calgary. It opened in 1986 as a Costco, and became Trail Appliances in 2004 once Costco moved to its new location. The system was replaced in about 2014, but the horn/strobes from when it opened remain.

System Specifications (2014-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by a Vigilant VS1 addressable fire alarm system. The panel is located in the main entrance. The system runs Vigilant's GSA addressable protocol, and the system coding is continuous; the notification appliances are self-coded.

Notification Appliances[edit | edit source]

All notification appliances are System Sensor “SpectrAlert” P241575A horn/strobes (red, wall-mount, 15/75cd, set to electromechanical) These were installed when the building was converted, and were not replaced despite the upgrade.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Vigilant GSA-M270 addressable single-action "teardrop" pull stations.

Automatic Detection Devices[edit | edit source]

The sales floor is protected by a sprinkler system with waterflow detection, so there are no detectors visible.

Modules[edit | edit source]

There are Vigilant GSA-MM1 addressable monitor modules supervising the sprinkler system's tamper and flow switches.

EOLs[edit | edit source]

There are Edwards EOL-P1 end-of-line resistor plates on all sprinkler and signal circuits.

Former System Specifications (2004-2014)[edit | edit source]

Former System Specifications
FACP: Notifier AFP-200
FACP Location: Main Entrance
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Strobes Synchronized: No
Date of last known Upgrade: N/A
Year Installed: 2004
Year Decommissioned: 2014

FACP[edit | edit source]

The building was protected by a Notifier AFP-200 addressable fire alarm system. The panel was located in the main entrance vestibule. The system ran Notifier's CLIP addressable protocol, and the system coding was temporal.

Notification Appliances[edit | edit source]

All notification appliances are System Sensor “SpectrAlert” P241575A horn/strobes (red, wall-mount, 15/75cd, set to electromechanical). These are still in use on the VS1.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations were Notifier MPS-950B conventional single-action pull stations, wired to Notifier FMM-101A addressable monitor modules.

Automatic Detection Devices[edit | edit source]

The sales floor is protected by a sprinkler system with waterflow detection, so there are no detectors visible.

Modules[edit | edit source]

There were Notifier FMM-1A addressable monitor modules supervising the sprinkler system's tamper and flow switches.

EOLs[edit | edit source]

There were Notifier EOL-CR end-of-line resistor plates on all sprinkler and signal circuits.