Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

O'Neil Tower: Difference between revisions

From FireAlarmPedia
No edit summary
No edit summary
 
Line 5: Line 5:
|  
|  
|-
|-
| FACP: Mircom FX-2000 <br /> FACP Location: Main Entrance <br />System Type: Addressable <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br /> System Coding: Temporal <br> Strobes Synchronized: Yes, Mircom <br />Date of last known Upgrade: 2021 <br />Year Opened: 1965
| FACP: Mircom FX-2000 <br /> FACP Location: Main Entrance <br />System Type: Single-Stage Addressable <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br /> System Coding: Temporal <br> Strobes Synchronized: Yes, Mircom <br />Date of last known Upgrade: 2021 <br />Year Opened: 1965
|}
|}
'''O’Neil Tower''' is an apartment building located at 700 9 Street Southwest, in Downtown Calgary, Alberta, Canada. The building opened in 1965, and the fire alarm system was fully upgraded in 2021.
'''O’Neil Tower''' is an apartment building located at 700 9 Street Southwest, in Downtown Calgary, Alberta, Canada. The building opened in 1965, and the fire alarm system was fully upgraded in 2021.

Latest revision as of 18:04, 14 October 2024

System Specifications
FACP: Mircom FX-2000
FACP Location: Main Entrance
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, Mircom
Date of last known Upgrade: 2021
Year Opened: 1965

O’Neil Tower is an apartment building located at 700 9 Street Southwest, in Downtown Calgary, Alberta, Canada. The building opened in 1965, and the fire alarm system was fully upgraded in 2021.

System Specifications[edit | edit source]

Please note that these system details are unconfirmed. This page should not be used for official purposes.

FACP[edit | edit source]

The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Mircom’s “Advanced” addressable protocol, and the system coding is temporal.

Notification Appliances[edit | edit source]

All notification appliances are Mircom FHS-400-WW horn/strobes (white, wall-mount, set to 15cd).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Mircom MS-401AP addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

There are Mircom MIX-2251APA addressable photoelectric smoke detectors throughout the common areas of the building, mounted on System Sensor B210LPA low-profile bases.