More actions
No edit summary |
|||
| Line 8: | Line 8: | ||
|} | |} | ||
The '''Calgary Fire Department''' is the fire department serving The City of Calgary. This page will cover Station 6, located at 360 8 Street SW, in Calgary, Alberta, Canada. The station was built in 2010, and the fire alarm system is original. | The '''Calgary Fire Department''' is the fire department serving The City of Calgary. This page will cover Station 6, located at 360 8 Street SW, in Calgary, Alberta, Canada. The station was built in 2010, and the fire alarm system is original. <br>This system is separate from the attached apartment building, and is not connected to that system. | ||
==System Specifications== | ==System Specifications== | ||
| Line 25: | Line 25: | ||
====Modules==== | ====Modules==== | ||
There are Mircom MIX-M500MA addressable monitor modules supervising the sprinkler system’s tamper and flow switches. <br>There is a Mircom MIX-M500DMA addressable dual-input monitor module supervising the generator’s run and trouble contacts. <br | There are Mircom MIX-M500MA addressable monitor modules supervising the sprinkler system’s tamper and flow switches. <br>There is a Mircom MIX-M500DMA addressable dual-input monitor module supervising the generator’s run and trouble contacts. <br>There are Mircom MIX-M500RA addressable relay modules for MUA and central vacuum shutdown. <br>There are System Sensor M500XA isolator modules on the SLC. | ||
====EOLs==== | ====EOLs==== | ||
Latest revision as of 12:30, 24 October 2024
| System Specifications |
|---|
| FACP: Mircom FX-2000 FACP Location: Main Entrance Vestibule System Type: Single-Stage Addressable System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Temporal Strobes Synchronized: No Date of last known Upgrade: N/A Year Opened: 2010 |
The Calgary Fire Department is the fire department serving The City of Calgary. This page will cover Station 6, located at 360 8 Street SW, in Calgary, Alberta, Canada. The station was built in 2010, and the fire alarm system is original.
This system is separate from the attached apartment building, and is not connected to that system.
System Specifications[edit | edit source]
FACP[edit | edit source]
The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Mircom’s CLIP addressable protocol, and the system coding is temporal.
Notification Appliances[edit | edit source]
All notification appliances are Mircom “Select-A-Horn/Strobe” FHS-240R horn/strobes (red, wall-mount, set to broadband/15cd).
Initiating Devices[edit | edit source]
Pull Stations[edit | edit source]
All pull stations but one are Mircom MS-401AD addressable single-action pull stations.
There is an Edwards 270-SPO conventional single-action pull station wired to a Mircom MIX-M501MA addressable monitor module at the main entrance as a deficiency replacement.
Automatic Detection Devices[edit | edit source]
There are Mircom MIX-2251BA addressable photoelectric smoke detectors throughout the second floor corridors, mounted on System Sensor B210LPA bases.
There are System Sensor DNRA duct smoke detector housings with Mircom MIX-2251BA addressable photoelectric heads on all make up air units.
Modules[edit | edit source]
There are Mircom MIX-M500MA addressable monitor modules supervising the sprinkler system’s tamper and flow switches.
There is a Mircom MIX-M500DMA addressable dual-input monitor module supervising the generator’s run and trouble contacts.
There are Mircom MIX-M500RA addressable relay modules for MUA and central vacuum shutdown.
There are System Sensor M500XA isolator modules on the SLC.
EOLs[edit | edit source]
There are Mircom MP-300 end of line resistor plates on all sprinkler, generator and signal circuits.