Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Safeway (McKenzie): Difference between revisions

From FireAlarmPedia
(Basic Canadian EST system.)
 
(good! just remember - integrity plates are 403-5A-R.)
Line 1: Line 1:
Safeway is a grocery store chain in North America.  This particular location is located in the South Trail Crossing shopping centre, but is officially known as the McKenzie location.  This particular location was built in 2004, and everything but the panel is original.
'''Safeway''' is a grocery store chain in North America.  This particular location is located in the South Trail Crossing Shopping Centre, but is officially known as the McKenzie location.  This particular location was built in 2004, and everything but the panel is original.


==System Specifications==
==System Specifications==


====FACP====
====FACP====
The main panel is an EST Quickstart QS1, installed in 2018 following a renovation.  It replaced an identical QS1 from 2004.  The system likely does code 3 in alarm.
The fire alarm panel is an EST QuickStart QS1, installed in 2018 following a renovation.  It replaced the original EST QuickStart QS1.  


====Notification Appliances====
====Notification Appliances====
The notification appliances are all Edwards MB10-24 10 inch motor bells on 405-5A-T strobe plates.
The notification appliances are all Edwards MB10-24 motor bells on 403-5A-R strobe plates.


===Initiating Devices===
===Initiating Devices===


====Pull Stations====
====Pull Stations====
All pull stations are EST SIGA-270 single-action pull stations.
The pull stations are EST SIGA-270 single-action addressable pull stations.


====Automatic Detection Devices====
====Automatic Detection Devices====
None noticed.
None noticed.

Revision as of 16:47, 28 March 2021

Safeway is a grocery store chain in North America. This particular location is located in the South Trail Crossing Shopping Centre, but is officially known as the McKenzie location. This particular location was built in 2004, and everything but the panel is original.

System Specifications

FACP

The fire alarm panel is an EST QuickStart QS1, installed in 2018 following a renovation. It replaced the original EST QuickStart QS1.

Notification Appliances

The notification appliances are all Edwards MB10-24 motor bells on 403-5A-R strobe plates.

Initiating Devices

Pull Stations

The pull stations are EST SIGA-270 single-action addressable pull stations.

Automatic Detection Devices

None noticed.