More actions
(The VS4 was installed last year in September) |
|||
| Line 5: | Line 5: | ||
| | | | ||
|- | |- | ||
| FACP: Kidde VS4 <br />System Type: | | FACP: Kidde VS4 <br />System Type: Hybrid <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />Date of last known Upgrade: 2020 <br />Year Opened: 1982 | ||
|} | |} | ||
'''Canadian Tire''' is a retail store chain in Canada. This location is in Dalhousie, NW Calgary. The building is from 1982, but nothing is original. The panel | '''Canadian Tire''' is a retail store chain in Canada. This location is in Dalhousie, NW Calgary. The building is from 1982, but nothing is original. The panel was replaced in September 2020, along with all the strobes, except for only a few. | ||
== System Specifications == | == System Specifications == | ||
| Line 14: | Line 14: | ||
==== FACP ==== | ==== FACP ==== | ||
The store is protected by a Kidde VS4 addressable fire alarm system. The panel is located in the automotive entrance, and although the system is addressable, the system is set up in a non-addressable manner. The panel was installed | The store is protected by a Kidde VS4 addressable fire alarm system. The panel is located in the automotive entrance, and although the system is addressable, the system is set up in a non-addressable manner. The panel was installed in 2020, replacing an EST ESA2000 or 6632. The permit issued was "Fire Alarm System Modification - Replace fire alarm control panel." | ||
==== Notification Appliances ==== | ==== Notification Appliances ==== | ||
The main notification appliances are Edwards 439D-10AWC vibrating bells with Wheelock "Exceder LED3" LSTW3-N (white, wall, no FIRE) LED remote strobes under them, or beside them for exits. The strobes replaced EST "Integrity" 202-5A-T remote strobes or EST "Integrity" 403-5A-R strobe plates when the VS4 was installed, however the bells were kept. There is one Mircom FS-240R remote strobe under an Edwards 439D-10AWC that was replaced prior to the VS4 due to an Integrity strobe no longer working, and it is still installed and it is near the open ceiling part. In aisle 41, there is an Edwards 439D-10AWC bell on a Wheelock RSSP-2415W strobe plate. Two Edwards bells have broke down, one was replaced with a Mircom BL-10B motor bell, and the other with a Mircom BL-6B motor bell, respectively. The Mircom bells can be found near the aisle closest to the cashiers. | The main notification appliances are Edwards 439D-10AWC vibrating bells with Wheelock "Exceder LED3" LSTW3-N (white, wall, no FIRE) LED remote strobes under them, or beside them for exits. The strobes replaced EST "Integrity" 202-5A-T remote strobes or EST "Integrity" 403-5A-R strobe plates in 2020 when the VS4 was installed, however the bells were kept. There is one Mircom FS-240R remote strobe under an Edwards 439D-10AWC that was replaced prior to the VS4 due to an Integrity strobe no longer working, and it is still installed and it is near the open ceiling part. In aisle 41, there is an Edwards 439D-10AWC bell on a Wheelock RSSP-2415W strobe plate. Two Edwards bells have broke down, one was replaced with a Mircom BL-10B motor bell, and the other with a Mircom BL-6B motor bell, respectively. The Mircom bells can be found near the aisle closest to the cashiers. | ||
=== Initiating Devices === | === Initiating Devices === | ||
Revision as of 21:53, 4 July 2021
| System Specifications |
|---|
| FACP: Kidde VS4 System Type: Hybrid System Line Voltage: 120VAC NAC Voltage: 24VFWR Date of last known Upgrade: 2020 Year Opened: 1982 |
Canadian Tire is a retail store chain in Canada. This location is in Dalhousie, NW Calgary. The building is from 1982, but nothing is original. The panel was replaced in September 2020, along with all the strobes, except for only a few.
System Specifications
FACP
The store is protected by a Kidde VS4 addressable fire alarm system. The panel is located in the automotive entrance, and although the system is addressable, the system is set up in a non-addressable manner. The panel was installed in 2020, replacing an EST ESA2000 or 6632. The permit issued was "Fire Alarm System Modification - Replace fire alarm control panel."
Notification Appliances
The main notification appliances are Edwards 439D-10AWC vibrating bells with Wheelock "Exceder LED3" LSTW3-N (white, wall, no FIRE) LED remote strobes under them, or beside them for exits. The strobes replaced EST "Integrity" 202-5A-T remote strobes or EST "Integrity" 403-5A-R strobe plates in 2020 when the VS4 was installed, however the bells were kept. There is one Mircom FS-240R remote strobe under an Edwards 439D-10AWC that was replaced prior to the VS4 due to an Integrity strobe no longer working, and it is still installed and it is near the open ceiling part. In aisle 41, there is an Edwards 439D-10AWC bell on a Wheelock RSSP-2415W strobe plate. Two Edwards bells have broke down, one was replaced with a Mircom BL-10B motor bell, and the other with a Mircom BL-6B motor bell, respectively. The Mircom bells can be found near the aisle closest to the cashiers.
Initiating Devices
Pull Stations
The pull stations are 1990s-2000s Edwards 270-SPO conventional pull stations, kept from the previous system. At one of the exits in the back, there is a brand new Edwards 270-SPO.
Automatic Detection Devices
None noticed.