More actions
mNo edit summary |
(Canadian, Eh?) |
||
Line 8: | Line 8: | ||
|} | |} | ||
The '''Stampede Grandstand''' is a 17,000 seat stadium in Stampede Park in SE Calgary, Alberta. It was built in 1974, but the fire alarm system is not original. The stadium stands about 6 stories high. It is the home of the Stampede rodeo, the GMC Rangeland Derby Chuckwagon Races, and the Grand Stand show. | The '''Stampede Grandstand''' is a 17,000 seat stadium in Stampede Park in SE Calgary, Alberta. It was built in 1974, but the fire alarm system is not original. The stadium stands about 6 stories high. It is the home of the Stampede rodeo, the GMC Rangeland Derby Chuckwagon Races, and the Grand Stand show. | ||
== System Specifications == | == System Specifications == | ||
==== FACP ==== | ==== FACP ==== | ||
The fire alarm panel is a two-stage Notifier NFS2-3030C installed in 2013 after the 2013 Calgary flooding that destroyed the old fire alarm panel, which was likely a Notifier AFP1010. The panel is in an unknown location, as it is not visible. | The fire alarm panel is a two-stage Notifier NFS2-3030C installed in 2013 after the 2013 Calgary flooding that destroyed the old fire alarm panel, which was likely a Notifier AFP1010. The panel is in an unknown location, as it is not visible. | ||
==== Notification Appliances ==== | ==== Notification Appliances ==== | ||
The notification appliances are System Sensor "SpectrAlert" P1224MCA (red, wall) horn/strobes. They are everywhere inside the stadium, and in some areas of the seating area. They were installed in the early-mid 2000s, but it is unknown when they were installed. | |||
The notification appliances are System Sensor "SpectrAlert" | |||
=== Initiating Devices === | === Initiating Devices === | ||
==== Pull Stations ==== | ==== Pull Stations ==== | ||
The pull stations are a mix of Notifier NFM-950KB and MPS-950KB two-stage pull stations. These were installed when the AFP1010 was installed, which was around the 2000s. There is one Notifier N-MPS-2A two-stage pull station as a replacement, on the 2nd floor. It was installed sometime after 2013, as they are only compatible with the ONYX series. | The pull stations are a mix of Notifier NFM-950KB and MPS-950KB two-stage pull stations. These were installed when the AFP1010 was installed, which was around the 2000s. There is one Notifier N-MPS-2A two-stage pull station as a replacement, on the 2nd floor. It was installed sometime after 2013, as they are only compatible with the ONYX series. | ||
==== Automatic Detection Devices ==== | ==== Automatic Detection Devices ==== | ||
None noticed. | None noticed. | ||
[[Category:Facilities]] | [[Category:Facilities]] |
Revision as of 10:19, 15 November 2021
System Specifications |
---|
FACP: Notifier NFS2-3030C System Type: Addressable (Two-Stage) System Line Voltage: 120VAC NAC Voltage: 24VDC Date of last known Upgrade: 2013 Year Opened: 1974 |
The Stampede Grandstand is a 17,000 seat stadium in Stampede Park in SE Calgary, Alberta. It was built in 1974, but the fire alarm system is not original. The stadium stands about 6 stories high. It is the home of the Stampede rodeo, the GMC Rangeland Derby Chuckwagon Races, and the Grand Stand show.
System Specifications
FACP
The fire alarm panel is a two-stage Notifier NFS2-3030C installed in 2013 after the 2013 Calgary flooding that destroyed the old fire alarm panel, which was likely a Notifier AFP1010. The panel is in an unknown location, as it is not visible.
Notification Appliances
The notification appliances are System Sensor "SpectrAlert" P1224MCA (red, wall) horn/strobes. They are everywhere inside the stadium, and in some areas of the seating area. They were installed in the early-mid 2000s, but it is unknown when they were installed.
Initiating Devices
Pull Stations
The pull stations are a mix of Notifier NFM-950KB and MPS-950KB two-stage pull stations. These were installed when the AFP1010 was installed, which was around the 2000s. There is one Notifier N-MPS-2A two-stage pull station as a replacement, on the 2nd floor. It was installed sometime after 2013, as they are only compatible with the ONYX series.
Automatic Detection Devices
None noticed.