Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Marlborough Station: Difference between revisions

From FireAlarmPedia
(There's more than one confirmed SIGA-270. Also added info about the addressable protocol.)
Line 8: Line 8:
|}
|}
'''Marlborough Station''' is a [[CTrain]] light rail station on the Blue Line. It is located near the neighborhood of Marlborough, NE Calgary. The station was built in 1985, but none of the fire alarm system is original. The fire panel seems to be from 2013, as there was construction there that year.  
'''Marlborough Station''' is a [[CTrain]] light rail station on the Blue Line. It is located near the neighborhood of Marlborough, NE Calgary. The station was built in 1985, but none of the fire alarm system is original. The fire panel seems to be from 2013, as there was construction there that year.  
== System Specifications ==
== System Specifications (1990s-present) ==
==== FACP ====
==== FACP ====
The fire alarm panel is most likely an EST QuickStart QS1. It is unconfirmed because it's not visible, but the automatic detection devices suggest it. It was most likely installed in 2013.  This system runs on EST's Signature-series addressable protocol, and likely does code 3 in alarm.  
The fire alarm panel is most likely an EST QuickStart QS1. It is unconfirmed because it's not visible, but the automatic detection devices suggest it. It was most likely installed in 2013.  This system runs on EST's Signature-series addressable protocol, and likely does code 3 in alarm.  

Revision as of 22:40, 10 February 2022

System Specifications
FACP: Presumably EST QuickStart QS1
System Type: Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
Date of last known Upgrade: 2013
Year Opened: 1985

Marlborough Station is a CTrain light rail station on the Blue Line. It is located near the neighborhood of Marlborough, NE Calgary. The station was built in 1985, but none of the fire alarm system is original. The fire panel seems to be from 2013, as there was construction there that year.

System Specifications (1990s-present)

FACP

The fire alarm panel is most likely an EST QuickStart QS1. It is unconfirmed because it's not visible, but the automatic detection devices suggest it. It was most likely installed in 2013. This system runs on EST's Signature-series addressable protocol, and likely does code 3 in alarm.

Notification Appliances

The notification appliances consist of a General Signal MB6-24 motor bell at the bottom of the stairs, a Wheelock MBS-G6-24 motor bell/strobe at the top of the stairs, and two Edwards MB10-24 motor bells on EST "Integrity" 403-5A-R strobe plates so far seen at the entrance and in an inaccessible area.

Initiating Devices

Pull Stations

All pull stations are EST SIGA-270 Signature-series addressable single-action "teardrop" pull stations.

Automatic Detection Devices

The smoke detectors are EST SIGA-PS Signature-series addressable photoelectric smoke detectors. They were installed in 2013.