Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Boundary Ranch: Difference between revisions

From FireAlarmPedia
mNo edit summary
Line 14: Line 14:
==== FACP ====
==== FACP ====


The fire alarm control panel is a Simplex 4004. It is not original, as it was installed around 1994. The annunciator at the entrance has four zones and is Simplex, which indicates that the system is a 4004. The main FACP is not visible, it's probably in a locked room. It most likely replaced the original Simplex 4001.
The lodge is protected by a Simplex 4004 fire alarm system. It is not original, as it was installed around 1994. The annunciator at the entrance has four zones and is Simplex, which indicates that the system is a 4004. The main FACP is not visible, it's probably in a locked room. It most likely replaced the original Simplex 4001.


==== Notification Appliances ====
==== Notification Appliances ====

Revision as of 21:40, 28 February 2022

System Specifications
FACP: Simplex 4004
System Type: Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VDC
Date of last known Upgrade: 1994?
Year Opened: 1987
Years in Service: Approximately 28

Boundary Ranch is a horseback riding service in Kananaskis, AB. The main building has a fire alarm system, which was built in 1987, but the system is not original. The building has a gift shop, and a café in it.

System Specifications (circa 1994-present)

FACP

The lodge is protected by a Simplex 4004 fire alarm system. It is not original, as it was installed around 1994. The annunciator at the entrance has four zones and is Simplex, which indicates that the system is a 4004. The main FACP is not visible, it's probably in a locked room. It most likely replaced the original Simplex 4001.

Notification Appliances

The notification appliances are Simplex 2901-9720 motor bells, but on Wheelock WS strobe plates (seen on the Wheelock 46T-G6-24-WS vibrating bell/strobe), or maybe the original Wheelock bells on the strobe plates quit working and were replaced with 2901-9720 bells.

Initiating Devices

Pull Stations

The pull stations are all original from 1987. They are Simplex 4251-20, single action T-bars. One was replaced with a Simplex 2099-9754. They are possibly labeled as Simplex 2099-9201.

Automatic Detection Devices

None were noticed.