Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

TELUS Spark: Difference between revisions

From FireAlarmPedia
mNo edit summary
(page overhaul. GARBAGE SYSTEM! JK)
Line 5: Line 5:
|  
|  
|-
|-
| FACP: Siemens FireFinder XLS <br />System Type: Addressable (Two-Stage) <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br />Date of last known Upgrade: N/A <br />Year Opened: 2011
| FACP: Siemens FireFinder XLS <br /> FACP Location: Electrical Room? <br />System Type: Addressable, Two-Stage <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br /> System Coding: 20BPM (First Stage) <br> Temporal (GA) <br> Strobes Synchronized: Yes <br />Date of last known Upgrade: N/A <br />Year Opened: 2011
|}
|}


'''TELUS Spark''' is a science museum in Calgary. It is located right of off St. George's Drive NE, close to the Calgary Zoo. This science center was built in 2011, replacing the original Telus World of Science located off of 11 St SW, in Downtown CalgaryDespite being regarded as superior to TWOS, this center is noticeably smaller than the building it replaced. The science center's fire alarm system is original, no modifications since 2011.
‘’’Telus Spark Science Centre’’’ is a science museum located at 220 Saint George’s Drive Northeast, in Calgary, Alberta, Canada. The museum had 431,262 visitors in 2016Opened in 2011, it is the newest science museum in Canada. The fire alarm system is original to the building.


== System Specifications ==
==System Specifications==
====FACP====
The building is protected by a Siemens FireFinder XLS addressable fire alarm system.  The panel is likely located in an electrical room.  The system runs Siemens’ FirePrint addressable protocol, and is configured for two-stage operation.  First stage coding is 20BPM, followed by temporal in general alarm.


==== FACP ====
=====Annunciators=====
There is a Siemens SSD (System Status Display) annunciator in the main entrance vestibule.


The fire alarm system is a two-stage Siemens FireFinder XLS. It is unknown where the panel is located as it is not visible, but the annunciator is at the front entrance.
====Notification Appliances====
All notification appliances are Siemens MTH-MC-W-B horn/strobes (white, wall-mount, bilingual lettering). These are set to the continuous horn tone, and are coded by the main FACP.


==== Notification Appliances ====
===Initiating Devices===
====Pull Stations====
All pull stations are Siemens HMS-2S addressable two-stage single-action pull stations.


All of the notification appliances are Siemens MTH-MC-W-B multi-tone horn/strobes. They are rebrands of the Wheelock MT-24MCW-FW. They are the only signal seen throughout the entire science center.
====Automatic Detection Devices====
 
There are Siemens HFP-11 addressable multisensor smoke/heat detectors throughout the building.
=== Initiating Devices ===
 
==== Pull Stations ====
 
All pull stations are the same, they are Siemens HMS-2S (bilingual and two stage).
 
==== Automatic Detection Devices ====
 
All detectors are Siemens FirePrint FP-11 intelligent multi-sensor heat/smoke detectors.
[[Category:Facilities]]

Revision as of 23:57, 12 November 2022

System Specifications
FACP: Siemens FireFinder XLS
FACP Location: Electrical Room?
System Type: Addressable, Two-Stage
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: 20BPM (First Stage)
Temporal (GA)
Strobes Synchronized: Yes
Date of last known Upgrade: N/A
Year Opened: 2011

‘’’Telus Spark Science Centre’’’ is a science museum located at 220 Saint George’s Drive Northeast, in Calgary, Alberta, Canada. The museum had 431,262 visitors in 2016. Opened in 2011, it is the newest science museum in Canada. The fire alarm system is original to the building.

System Specifications

FACP

The building is protected by a Siemens FireFinder XLS addressable fire alarm system. The panel is likely located in an electrical room. The system runs Siemens’ FirePrint addressable protocol, and is configured for two-stage operation. First stage coding is 20BPM, followed by temporal in general alarm.

Annunciators

There is a Siemens SSD (System Status Display) annunciator in the main entrance vestibule.

Notification Appliances

All notification appliances are Siemens MTH-MC-W-B horn/strobes (white, wall-mount, bilingual lettering). These are set to the continuous horn tone, and are coded by the main FACP.

Initiating Devices

Pull Stations

All pull stations are Siemens HMS-2S addressable two-stage single-action pull stations.

Automatic Detection Devices

There are Siemens HFP-11 addressable multisensor smoke/heat detectors throughout the building.