Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Calgary Co-op (Beddington): Difference between revisions

From FireAlarmPedia
No edit summary
No edit summary
Line 30: Line 30:
====Automatic Detection Devices====
====Automatic Detection Devices====
None noticed.
None noticed.
[[Category:Facilities]]
[[Category:Facilitie]

Revision as of 12:40, 3 April 2023

System Specifications
FACP: Notifier NFS-320C
FACP Location: Unknown
System Type: Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Strobes Synchronized: Yes, SS
Date of last known Upgrade: 2010s
Year Opened: 1979

Calgary Co-op is a chain of member-owned stores across Calgary. This particular store is located at 8220 Centre Street North, in Calgary, Alberta, Canada. This location is attached to a small shopping plaza, which is also covered by the fire alarm system. The store opened in 1979, and is scheduled to close on March 8th, 2023. The fire alarm system was upgraded in the 2000s, with a panel replacement occurring in the 2010s.

System Specifications (2000s-present)

FACP

The building is protected by a Notifier NFS-320C addressable fire alarm system. The panel location is unknown. The system runs Notifier’s FlashScan addressable protocol, and the system coding is temporal. This panel replaced a Notifier AFP-200.

Annunciators

There is a Notifier LCD-80TM annunciator paired with a Notifier ACM-24AT annunciator in the mall’s main entrance vestibule.

Notification Appliances

Co-op

All notification appliances but one are System Sensor “SpectrAlert” PC24MCWA horn/strobes (white, ceiling-mount, set to 15cd/electromechanical). There is a Mircom “Select-A-Horn/Strobe” FHS-340R horn/strobe (red, wall-mount, set to broadband/15cd) behind the bakery counter as a deficiency replacement.

Mall

All notification appliances are System Sensor “SpectrAlert” P1224MCA horn/strobes (red, wall-mount, set to 15cd/electromechanical).

Initiating Devices

Pull Stations

All pull stations are Notifier MPS-950B conventional single-action pull stations. All stations are wired to Notifier FMM-101A addressable monitor modules, located directly behind each station.

Automatic Detection Devices

None noticed. [[Category:Facilitie]