More actions
Twentytwo22 (talk | contribs) No edit summary |
No edit summary |
||
| Line 12: | Line 12: | ||
== System Specifications == | == System Specifications == | ||
==== FACP ==== | ==== FACP ==== | ||
The panel is a Kidde VS4, installed in the 2010s. It most likely replaced an EST 6616 from the 1990s. The system has all strobes synchronized, and all horns doing code-3. There is an annunciator at the entrance, however the panel is not visible, it's located in the upstairs mechanical/boiler room | The panel is a Kidde VS4, installed in the 2010s. It most likely replaced an EST 6616 from the 1990s. The system has all strobes synchronized, and all horns doing code-3. There is an annunciator at the entrance, however the panel is not visible, it's located in the upstairs mechanical/boiler room. | ||
==== Notification Appliances ==== | ==== Notification Appliances ==== | ||
The notification appliances inside were updated in July 2019. | The notification appliances inside were updated in July 2019. Like almost every other school in the district, the building's notification appliances are from EST's Genesis line of devices. The main devices are EST GC-HDVM (white, ceiling, no FIRE marking) horn/strobes set on low volume, replacing G1R-HDVM horn/strobes. However EST G1R-HDVM (red, wall, no FIRE) horn/strobes remained in the gym and shop, but were moved to different locations. Outside, there is an EST Integrity CS405-8A-T strobe by the entrance. There were originally two, but one of them was removed in 2019. There is one EST WG4RN-HVMC (red, no FIRE) horn/strobe for outdoor notification as well, located by the tarmac. | ||
=== Initiating Devices === | === Initiating Devices === | ||
==== Pull Stations ==== | ==== Pull Stations ==== | ||
The pull stations are all Edwards 270-SPO, but from different eras. Most are from the early 1990s, some from the mid 1990s, one newer GE branded 270, and a couple from 1970s-80s with the old E logo. There may also be a 270-SPO from 1957. | The pull stations are all Edwards 270-SPO, but from different eras. Most are from the early 1990s, some from the mid 1990s, one newer GE branded 270, and a couple from 1970s-80s with the old E logo. There may also be a 270-SPO from 1957. All pull stations are wired into Kidde GSA-CT1 addressable modules, as they are conventional. | ||
==== Automatic Detection Devices ==== | ==== Automatic Detection Devices ==== | ||
There are Kidde GSA2-PS addressable photoelectric smoke detectors throughout, from the 2010s when the Kidde was installed. Heat detectors are unknown at this time. | There are Kidde GSA2-PS addressable photoelectric smoke detectors throughout, from the 2010s when the Kidde was installed. Heat detectors are unknown at this time. | ||
[[Category:Facilities]] | [[Category:Facilities]] | ||
[[Category:Facilities]] | [[Category:Facilities]] | ||
Revision as of 19:19, 21 November 2023
| System Specifications |
|---|
| FACP: Kidde VS4 System Type: Hybrid (mostly Addressable) System Line Voltage: 120VAC NAC Voltage: 24VFWR Date of last known Upgrade: 2019 Year Opened: 1957 |
Our Lady of the Assumption School is a catholic school that teaches Kindergarten to Grade 9, and is located in the neighborhood of Bowness in Calgary, Alberta. This school was built in 1957, and has its current system since 2019.
System Specifications
FACP
The panel is a Kidde VS4, installed in the 2010s. It most likely replaced an EST 6616 from the 1990s. The system has all strobes synchronized, and all horns doing code-3. There is an annunciator at the entrance, however the panel is not visible, it's located in the upstairs mechanical/boiler room.
Notification Appliances
The notification appliances inside were updated in July 2019. Like almost every other school in the district, the building's notification appliances are from EST's Genesis line of devices. The main devices are EST GC-HDVM (white, ceiling, no FIRE marking) horn/strobes set on low volume, replacing G1R-HDVM horn/strobes. However EST G1R-HDVM (red, wall, no FIRE) horn/strobes remained in the gym and shop, but were moved to different locations. Outside, there is an EST Integrity CS405-8A-T strobe by the entrance. There were originally two, but one of them was removed in 2019. There is one EST WG4RN-HVMC (red, no FIRE) horn/strobe for outdoor notification as well, located by the tarmac.
Initiating Devices
Pull Stations
The pull stations are all Edwards 270-SPO, but from different eras. Most are from the early 1990s, some from the mid 1990s, one newer GE branded 270, and a couple from 1970s-80s with the old E logo. There may also be a 270-SPO from 1957. All pull stations are wired into Kidde GSA-CT1 addressable modules, as they are conventional.
Automatic Detection Devices
There are Kidde GSA2-PS addressable photoelectric smoke detectors throughout, from the 2010s when the Kidde was installed. Heat detectors are unknown at this time.