Canmore Inn & Suites: Difference between revisions

Revision as of 11:55, 2 December 2023

System Specifications

FACP: Notifier NFS2-640C
System Type: Lobby
System Line Voltage: 120VAC
NAC Voltage: 24VDC

System Coding: Temporal

Strobes Synchronized: Wheelock Only
Date of last known Upgrade: 2021
Year Opened: 1996

Canmore Inn & Suites is a 3-star hotel located at 1402 Bow Valley Trail, Canmore, AB. It was built in 1996, and everything except for the fire alarm panel seems to be original. This hotel was previously known as Ramada until around 2016-17.

System Specifications (2021 present)

FACP

The building is protected by a Notifier NFS2-640C conventional fire alarm system. The panel is located in the lobby, and has an NCA-2 display. The system coding is temporal.

Notification Appliances

All common area notification appliances are System Sensor "L-Series" HRLA horns (red, wall-mount) horns on Wheelock RSSP-24MCW strobe plates (red, set to 15cd). The guest rooms contain EST 964-3A-103 mini-horn/strobes (white, 30cd), these remained from the previous system.

Initiating Devices

Pull Stations

All pull stations are Edwards 270-SPO conventional pull stations. These were kept from the original system.

Automatic Detection Devices

All smoke detecors are System Sensor "i3" C2W-BA photoelectric smoke detectors, which also remained. There is also a sprinkler system with waterflow detection.

Former System Specifications (1996-2021)

FACP

The hotel was protected by a Simplex 4100U conventional fire alarm system. The panel was located in the lobby, and replaced the original EST ESA2000 around 2006. The system coding was likely continuous.

Notification Appliances

All common area notification appliances were Edwards 439D-6AWC vibrating bells (6" gong) on EST "Integrity" 403-5A-R strobe plates (red, 15cd). The workout room had the aforementioned bell installed remotely. The pool area had an Edwards 439D-10AWC vibrating bell (10" gong) on an EST 403-5A-R strobe plate, due to higher ambient noise levels. The guest rooms contained EST 692-3A-103 mini-horn/strobes (white, 30cd), these are still in service.

Initiating Devices

Pull Stations

All pull stations were Edwards 270-SPO conventional pull stations; these remain on the current system.

Automatic Detection Devices

All smoke detectors are System Sensor C2W-BA photoelectric smoke detectors, these are still installed.

@@ Line 5: / Line 5: @@
 |
 |-
-| FACP: Simplex 4100U <br />System Type: Addressable (Hybrid Manner) <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VDC<br />Date of last known Upgrade: Mid-late 2000s <br />Year Opened: 1996
+| FACP: Notifier NFS2-640C<br />System Type: Lobby<br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VDC
+System Coding: Temporal
+Strobes Synchronized: Wheelock Only<br />Date of last known Upgrade: 2021<br />Year Opened: 1996
 |}
+'''Canmore Inn & Suites''' is a 3-star hotel located at 1402 Bow Valley Trail, Canmore, AB. It was built in 1996, and everything except for the fire alarm panel seems to be original. This hotel was previously known as Ramada until around 2016-17.
-'''Canmore Inn & Suites''' is a 3-star hotel in Canmore, AB. It has just 3 floors, but is a very long hotel with long hallways. It was built in 1996, and everything except for the fire alarm panel seems to be original. This hotel was previously known as Ramada until around 2016-17.
+== System Specifications (2021 present) ==
-== System Specifications ==
 ==== FACP ====
+The building is protected by a Notifier NFS2-640C conventional fire alarm system. The panel is located in the lobby, and has an NCA-2 display. The system coding is temporal.
-The fire alarm control panel is a Simplex 4100U, installed somewhere around 2005-2010, most likely replacing an EST ESA2000 or 6632 from 1996. Despite the 4100U being addressable, it is set up in a non-addressable manner. The panel is located behind the front desk.
 ==== Notification Appliances ====
+All common area notification appliances are System Sensor "L-Series" HRLA horns (red, wall-mount) horns on Wheelock RSSP-24MCW strobe plates (red, set to 15cd). The guest rooms contain EST 964-3A-103 mini-horn/strobes (white, 30cd), these remained from the previous system.
-The notification appliances seen throughout the hotel's lobby and hallways are Edwards 439D-6AWC vibrating bells on EST "Integrity" 403-5A-R strobe plates. The pool area has an Edwards 439D-10AWC vibrating bell on an EST 403-5A-R strobe plate, due to louder ambient noise levels. The rooms have EST 692-5A-103 mini-horn/strobes. The workout room has an upside down Edwards 439D-6AWC vibrating bell with no strobe plate. All of the notification appliances were left over from the EST system.
 === Initiating Devices ===
 ==== Pull Stations ====
+All pull stations are Edwards 270-SPO conventional pull stations. These were kept from the original system.
+==== Automatic Detection Devices ====
+All smoke detecors are System Sensor "i3" C2W-BA photoelectric smoke detectors, which also remained. There is also a sprinkler system with waterflow detection.
-All of the pull stations are Edwards 270-SPO from 1996, left over from the EST system.
+== Former System Specifications (1996-2021) ==
+==== FACP ====
+The hotel was protected by a Simplex 4100U conventional fire alarm system. The panel was located in the lobby, and replaced the original EST ESA2000 around 2006. The system coding was likely continuous.
+==== Notification Appliances ====
+All common area notification appliances were Edwards 439D-6AWC vibrating bells (6" gong) on EST "Integrity" 403-5A-R strobe plates (red, 15cd). The workout room had the aforementioned bell installed remotely. The pool area had an Edwards 439D-10AWC vibrating bell (10" gong) on an EST 403-5A-R strobe plate, due to higher ambient noise levels. The guest rooms contained EST 692-3A-103 mini-horn/strobes (white, 30cd), these are still in service.
+=== Initiating Devices ===
+==== Pull Stations ====
+All pull stations were Edwards 270-SPO conventional pull stations; these remain on the current system.
 ==== Automatic Detection Devices ====
+All smoke detectors are System Sensor C2W-BA photoelectric smoke detectors, these are still installed.
-The smoke detectors are all System Sensor C2W-BA photoelectric i3 smoke detectors. There were most likely Edwards 6264B smoke detectors before the Simplex system.
-[[]
-[[]