Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Nutrien Western Event Centre: Difference between revisions

From FireAlarmPedia
(Attempted an overhaul.)
mNo edit summary
Line 22: Line 22:
All pull stations are Siemens HMS-SA addressable single-action pull stations.  
All pull stations are Siemens HMS-SA addressable single-action pull stations.  
==== Automatic Detection Devices ====
==== Automatic Detection Devices ====
There are Siemens "FirePrint" FP-11 addressable multi-sensor smoke/heat detectors located throughout the venue. There is also a sprinkler system with waterflow.
There are Siemens "FirePrint" FP-11 addressable multi-sensor smoke/heat detectors located throughout the venue. There is also a sprinkler system with waterflow detection.
 
==== Modules ====
There are Siemens XTRI-M addressable monitor modules supervising the sprinkler system's tamper and flow switches.
[[Category:Facilities]]
[[Category:Facilities]]
[[Category:Facilities]]
[[Category:Facilities]]

Revision as of 13:17, 30 December 2023

System Specifications
FACP: Siemens FireFinder XLS

FACP Location: Main Entrance Vestibule
System Type: Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC

System Coding: Temporal

Strobes Synchronized: Yes
Date of last known Upgrade: N/A
Year Opened: 2014

The Nutrien Western Event Centre is an event centre located at 1800 Stampede Trail SE, Calgary, AB. It is in Stampede Park. It consists of a 2,600-seat arena and a 20,000 sq ft. exhibition hall, and usually hosts rodeos and western competitions. It was built in 2014 as the Agrium Western Event Centre, changing to Nutrien in 2018. The fire alarm system is original.

System Specifications (2014-present)

FACP

The building is protected by a Siemens FireFinder XLS addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Siemens' FirePrint addressable protocol, and the system coding is temporal.

Notification Appliances

All indoor notification appliances are Siemens SFM24-10A motor bells (10" gong) on Siemens ST-RETRO-MC-R-B strobe plates (red, bilingual, set to 15cd). For exterior notification, there is a Siemens ST-75-WP-B weatherproof remote strobe (red, wall-mount, bilingual, set to 75cd) outside the entrance.

Initiating Devices

Pull Stations

All pull stations are Siemens HMS-SA addressable single-action pull stations.

Automatic Detection Devices

There are Siemens "FirePrint" FP-11 addressable multi-sensor smoke/heat detectors located throughout the venue. There is also a sprinkler system with waterflow detection.

Modules

There are Siemens XTRI-M addressable monitor modules supervising the sprinkler system's tamper and flow switches.