Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Manchester R (City of Calgary): Difference between revisions

From FireAlarmPedia
mNo edit summary
(Added information confirmed during the annual inspection.)
Line 17: Line 17:
All pull stations are Mircom MS-401AD addressable single-action pull stations.
All pull stations are Mircom MS-401AD addressable single-action pull stations.
====Automatic Detection Devices====
====Automatic Detection Devices====
There are Mircom MIX-2251BA addressable photoelectric smoke detectors in some areas, mounted on System Sensor B210LPA bases.
There are Mircom MIX-2251APA addressable photoelectric smoke detectors in some areas.
 
There are Mircom MIX-5251APA addressable 135°F fixed-temperature heat detectors in most areas.
 
All aforementioned detectors are mounted on System Sensor B210LPA bases.
 
There are System Sensor DNRA duct smoke detector housings with Mircom MIX-2251APA addressable photoelectric heads on all air handling units.
====Modules====
====Modules====
There are Mircom MIX-M500MA addressable monitor modules supervising the sprinkler system’s tamper and flow switches.
There are Mircom MIX-M500MA addressable monitor modules supervising the sprinkler system’s tamper and flow switches.
There are Mircom MIX-M500RA addressable relay modules for HVAC shutdown.
There are System Sensor M500XA isolator modules on the SLC.

Revision as of 16:14, 9 May 2024

System Specifications
FACP: Mircom FX-2000
FACP Location: Main Entrance
System Type: Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: No
Date of last known Upgrade: 2016
Year Opened: 1972

Manchester is a City of Calgary operations centre located at 651 25 Avenue Southeast, in Calgary, Alberta, Canada. This page will cover Building R, which is part of the roads division. The building was built in 1972, and the fire alarm system was upgraded in 2016.

System Specifications (2016-present)

FACP

The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Mircom’s CLIP addressable protocol, and the system coding is temporal.

Notification Appliances

All notification appliances are Mircom “Select-A-Horn/Strobe” FHS-340R horn/strobes (red, wall-mount, set to electromechanical/15cd).

Initiating Devices

Pull Stations

All pull stations are Mircom MS-401AD addressable single-action pull stations.

Automatic Detection Devices

There are Mircom MIX-2251APA addressable photoelectric smoke detectors in some areas.

There are Mircom MIX-5251APA addressable 135°F fixed-temperature heat detectors in most areas.

All aforementioned detectors are mounted on System Sensor B210LPA bases.

There are System Sensor DNRA duct smoke detector housings with Mircom MIX-2251APA addressable photoelectric heads on all air handling units.

Modules

There are Mircom MIX-M500MA addressable monitor modules supervising the sprinkler system’s tamper and flow switches.

There are Mircom MIX-M500RA addressable relay modules for HVAC shutdown.

There are System Sensor M500XA isolator modules on the SLC.