Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Elizabeth Barrett Elementary School: Difference between revisions

From FireAlarmPedia
mNo edit summary
No edit summary
Line 29: Line 29:
====FACP====
====FACP====
The building was protected by an EST ESA2000 conventional fire alarm system. The panel was located in the lobby. The system coding was continuous.
The building was protected by an EST ESA2000 conventional fire alarm system. The panel was located in the lobby. The system coding was continuous.
==== Notification Appliances ====
==== Notification Appliances ====
All notification appliances but one are Edwards 439D-10AWC vibrating bells (10” gong). These are still in use on the current system.
All notification appliances but one are Edwards 439D-10AWC vibrating bells (10” gong). These are still in use on the current system.
 
=== Initiating Devices ===
=== Initiating Devices ===
==== Pull Stations ====
==== Pull Stations ====
All pull stations were Edwards 270-SPO conventional pull stations.
All pull stations were Edwards 270-SPO conventional pull stations.
==== Automatic Detection Devices ====
==== Automatic Detection Devices ====
There were Edwards 6250C conventional ionization smoke detectors throughout the building.  
There were Edwards 6250C conventional ionization smoke detectors throughout the building.  


Some areas had Edwards 281C fixed/rate-of-rise heat detectors.
Some areas had Edwards 281C fixed/rate-of-rise heat detectors.
[[Category:Alberta]]
[[Category:Schools]]

Revision as of 15:06, 25 May 2024

System Specifications
FACP: EST QuickStart QS1
FACP Location: Lobby
System Type: Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal?
Date of last known Upgrade: 2008
Year Opened: 1977

Elizabeth Barrett Elementary School is an elementary school located at 605 4 Ave N, Cochrane, AB. It was built in 1977, and had portables added in 1991 and 1999. The fire alarm system was mostly upgraded in 2008.

System Specifications (2008-present)

FACP

The building is protected by an EST QuickStart QS1 addressable fire alarm system. The panel is located in the lobby. The system runs EST’s Signature addressable protocol, and the system coding is likely temporal.
The QuickStart QS1 replaced an EST ESA2000 in 2008.

Notification Appliances

All notification appliances but one are Edwards 439D-10AWC vibrating bells (10” gong). These were installed in 1993, and were not replaced with the upgrade. These are also on the exterior.
There is an Edwards MB10-24 motor bell (10” gong) on the exterior as a deficiency replacement.

Initiating Devices

Pull Stations

All pull stations are EST SIGA-270 addressable single-action pull stations.

Automatic Detection Devices

There are EST SIGA-PS addressable photoelectric smoke detectors throughout the building.
Some areas have EST SIGA-HRS addressable fixed/rate-of-rise heat detectors.
All detectors are mounted on SIGA-SB bases.

Former System Specifications (1993-2008)

System Specifications
FACP: EST ESA2000
FACP Location: Lobby
System Type: Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Continuous
Date of last known Upgrade: N/A
Year Installed: 1993
Year Decommissioned: 2008

FACP

The building was protected by an EST ESA2000 conventional fire alarm system. The panel was located in the lobby. The system coding was continuous.

Notification Appliances

All notification appliances but one are Edwards 439D-10AWC vibrating bells (10” gong). These are still in use on the current system.

Initiating Devices

Pull Stations

All pull stations were Edwards 270-SPO conventional pull stations.

Automatic Detection Devices

There were Edwards 6250C conventional ionization smoke detectors throughout the building.

Some areas had Edwards 281C fixed/rate-of-rise heat detectors.