Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Scenic Bow Group Home 20

From FireAlarmPedia
Revision as of 21:57, 12 October 2024 by Alberta Fire Alarms (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Mircom FA-1025T
FACP Location: Main Office
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Continuous
Date of last known Upgrade: 2010s
Year Opened: 1987

Scenic Bow Place is an assisted living facility operated by Alberta Health Services. This page will cover Group Home 20, located at #112 100 Scenic Bow Place NW, in Calgary, Alberta, Canada. The home was built in 1987, and the fire alarm system was upgraded in the 2010s.

System Specifications (2010s-present)

FACP

The building is protected by a Mircom FA-1025T conventional fire alarm system. The panel is located in the main office. The system coding is continuous.

Notification Appliances

All notification appliances are Mircom BL-6B motor bells (6” gong).

Initiating Devices

Pull Stations

There are no pull stations installed in this building.

Automatic Detection Devices

There are System Sensor “i3” C2W-BA conventional photoelectric smoke detectors throughout the building.
Some areas have System Sensor 5601A conventional 135°F fixed-temperature/rate-of-rise heat detectors.
The kitchen has a System Sensor 5603A conventional 135°F fixed-temperature heat detector.
Other areas have FDD CR135 conventional 135°F fixed-temperature/rate-of-rise heat detectors.

Modules

There are Mircom MP-300 end-of-line resistor plates on all circuits.