Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Century Park Professional Building

From FireAlarmPedia
Revision as of 19:51, 23 October 2024 by TwentyThree33 (talk | contribs) (Base model correction.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Mircom FX-2000
FACP Location: Unknown
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: No
Date of last known Upgrade: 2010s
Year Opened: 2006

The Century Park Professional Building is an office building located at 2377 111 Street NW, in Edmonton, Alberta, Canada. The building was built in 2006, and the fire alarm system is original.

System Specifications

FACP

The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel location is unknown. The system runs Mircom’s CLIP addressable protocol, and the system coding is temporal.

Annunciators

There is a Mircom RAX-LCD annunciator in the main lobby, mounted inside a Mircom BB-1001 enclosure.

Notification Appliances

Most notification appliances are Mircom “Select-A-Horn/Strobe” FHS-240R horn/strobes (red, wall-mount, set to 15cd).
There is a Mircom FHS-340R horn/strobe (red, wall-mount, set to electromechanical/15cd) in the main lobby as a deficiency replacement.

Initiating Devices

Pull Stations

All pull stations are Mircom MS-401AD addressable single-action pull stations.

Automatic Detection Devices

There are Mircom MIX-2251BA addressable photoelectric smoke detectors at the top of each stairwell, mounted on System Sensor B210LPA bases.

Modules

There are Mircom MIX-M500MA addressable monitor modules supervising the sprinkler system’s tamper and flow switches.

EOLs

There are Mircom MP-300 end of line resistor plates on all sprinkler and signal circuits.