Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Scenic Bow Group Home 18

From FireAlarmPedia
System Specifications
FACP: Mircom FA-1025T
FACP Location: Main Office
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Date of last known Upgrade: 2010s
Year Opened: 1987

Scenic Bow Place is a group home complex owned by Alberta Health Services. This page will cover Group Home 18, located at #104 100 Scenic Bow Place NW, in Calgary, Alberta, Canada. The home was built in 1987, and the fire alarm system was fully replaced in the 2010s.

System Specifications (2010s-present)

FACP

The building is protected by a Mircom FA-1025T conventional fire alarm system. The panel is located in the main office. The system coding is temporal.

Notification Appliances

The only notification appliance is a Simplex 4080-5 vibrating bell (6” gong).

Initiating Devices

Pull Stations

There are no pull stations on this system.

Automatic Detection Devices

There are System Sensor C2W-BA conventional photoelectric smoke detectors throughout all living areas.
There are System Sensor 5601A conventional 135-degree fixed-temperature/rate-of-rise heat detectors in all non-living areas.
There are FDD CR-135 conventional 135-degree fixed-temperature/rate-of-rise heat detectors in the basement storage rooms.
There are System Sensor 5603A conventional fixed-temperature heat detectors in the kitchen and furnace room.

EOLs

There are Simplex 2081-9040C end-of-line resistor plates on all circuits.