Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Bridlewood Centre

From FireAlarmPedia
Revision as of 12:48, 9 September 2024 by TwentyThree33 (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Simplex 4008
FACP Location: Main Electrical Room
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Continuous
Strobes Synchronized: No
Date of last known Upgrade: N/A
Year Opened: 2008

Bridlewood Centre is a small professional building located at 2577 Bridlecrest Way Southwest, in Calgary, Alberta, Canada. The building was built in 2008, and the fire alarm system is original.

System Specifications

FACP

The building is protected by a Simplex 4008 addressable fire alarm system. The panel is located in the main electrical room. The system runs Simplex’s IDNet addressable protocol, and the system coding is continuous.

Notification Appliances

All indoor notification appliances are Simplex 2901-9723 motor bells (6” gong) mounted on Wheelock RSSP-24MCW strobe plates (set to 15cd). The bells and strobes are wired in series.

For outdoor notification, there is a System Sensor “SpectrAlert” S2415KA remote strobe (red, wall-mount, 15cd) outside the main electrical room.

Initiating Devices

Pull Stations

All pull stations are Simplex 4099-9001 addressable single-action pull stations.

Automatic Detection Devices

There are Simplex “TrueAlarm” 4098-9714 addressable photoelectric smoke detectors throughout the building, as well as Simplex 4098-9733 addressable fixed/rate-of-rise heat detectors in some areas. All detectors are mounted on Simplex 4098-9792 addressable bases.

EOLs

There are Simplex 2081-9040C end of line resistor plates on all signal circuits.