Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

The Home Depot (Mackenzie)

From FireAlarmPedia
Revision as of 15:59, 18 November 2022 by Alberta Fire Alarms (talk | contribs) (overhaul. why did we think it was conventional XD. screechy flashy thing in captivity was a lazy install.)
System Specifications
FACP: Notifier AFP-200

FACP Location: unknown
System Type: Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC

System Coding: Temporal

Strobes Synchronized: No
Date of last known Upgrade: 2010s
Year Opened: 2005

The Home Depot is an American hardware store franchise. This particular store was built in 2005, and is located at 5125 126 Ave SE, in the Shepard area in SE Calgary. The system is original, and besides the addressable fire alarm panel, is essentially the same as the Shawnessy location.

System Specifications

FACP

The store is protected by a Notifier AFP-200C addressable fire alarm system. The panel location is unknown, but is assumed. The system runs Notifier's CLIP addressable protocol, and the system coding is temporal.

Annunciators

There is a Notifier LCD2-80 annunciator at the entrance.

Notification Appliances

The notification appliances are mainly the original System Sensor "SpectrAlert" P2415A (red, wall-mount, 15cd) horn/strobes. The restrooms have System Sensor S2415A (red, wall) remote strobes which are also original. The garden center has a System Sensor "SpectrAlert Advance" P4RA (red, wall-mount, 4-wire) horn/strobe behind a weatherproof cover, as a deficiency replacement of a System Sensor P1224MCKA (red, wall-mount) weatherproof horn/strobe in the 2010s. It is unknown why it is mounted like that, but it is possible that a P4RKA was not available.

Initiating Devices

Pull Stations

The main pull stations are the original Notifier MPS-950B conventional pull stations. There are also Tyco/Grinnell MS-401, and Simplex MS-301C pull stations, installed as deficiency replacements. All pull stations are wired to Notifier MMX-101A addressable modules, located directly behind the stations.

Automatic Detection Devices

Waterflow, no detectors present.