More actions
| System Specifications |
|---|
| FACP: Simplex 4100U System Type: Addressable (Hybrid Manner) System Line Voltage: 120VAC NAC Voltage: 24VDC Date of last known Upgrade: Mid-late 2000s Year Opened: 1996 |
Canmore Inn & Suites is a 3-star hotel in Canmore, AB. It has just 3 floors, but is a very long hotel with long hallways. It was built in 1996, and everything except for the fire alarm panel seems to be original. This hotel was previously known as Ramada until around 2016-17.
System Specifications
FACP
The fire alarm control panel is a Simplex 4100U, installed somewhere around 2005-2010, most likely replacing an EST ESA2000 or 6632 from 1996. Despite the 4100U being addressable, it is set up in a non-addressable manner. The panel is located behind the front desk.
Notification Appliances
The notification appliances seen throughout the hotel's lobby and hallways are Edwards 439D-6AWC vibrating bells on EST "Integrity" 403-5A-R strobe plates. The pool area has an Edwards 439D-10AWC vibrating bell on an EST 403-5A-R strobe plate, due to louder ambient noise levels. The rooms have EST 692-5A-103 mini-horn/strobes. The workout room has an upside down Edwards 439D-6AWC vibrating bell with no strobe plate. All of the notification appliances were left over from the EST system.
Initiating Devices
Pull Stations
All of the pull stations are Edwards 270-SPO from 1996, left over from the EST system.
Automatic Detection Devices
The smoke detectors are all System Sensor C2W-BA photoelectric i3 smoke detectors. There were most likely Edwards 6264B smoke detectors before the Simplex system. [[Category:Facilitie] [[Category:Facilitie]