Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

110 11 Ave SE, Calgary

From FireAlarmPedia
System Specifications
FACP: Notifier NFS2-640C
FACP Location: Unknown
System Type: Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Strobes Synchronized: Yes, SS
Date of last known Upgrade: 2016
Year Opened: 1904

110 11 Ave SE is the address of a building in Downtown Calgary, Alberta, Canada. The building formerly housed the Inn from the Cold shelter from 2008 to 2022. The building was built in 1904, and the fire alarm system was upgraded in 1996, and again in 2016.

System Specifications (2016-present)

FACP

The building is protected by a Notifier NFS2-640C addressable fire alarm system. The panel location is unknown. The system runs Notifier’s FlashScan addressable protocol, and the system coding is temporal.

Notification Appliances

All notification appliances are System Sensor “SpectrAlert Advance” P2RA horn/strobes (red, wall-mount, set to 15cd).

Initiating Devices

Pull Stations

All pull stations are Notifier NBG-12LX addressable dual-action pull stations.

Automatic Detection Devices

There are Notifier FSP-851A addressable photoelectric smoke detectors throughout the building, mounted on System Sensor B210LPA bases.

Modules

There are Notifier FMM-1A addressable monitor modules supervising the sprinkler system’s tamper and flow switches.

System Specifications (1996-2016)

System Specifications
FACP: Notifier AFP-400
FACP Location: Unknown
System Type: Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Unknown
Strobes Synchronized: No
Year Installed: 1996
Year Decommissioned: 2016

FACP

The building was protected by a Notifier AFP-400 addressable fire alarm system. The panel location was unknown. The system ran Notifier’s CLIP addressable protocol, and the system coding was likely continuous.

Notification Appliances

All notification appliances were System Sensor MASS24LO sounder/strobes (red, wall-mount, 1.5cd, set to 800Hz).

Initiating Devices

Pull Stations

All pull stations were Notifier NFM-950B conventional single-action pull stations. All stations had Notifier MMX-101A addressable monitor modules attached to them.

Automatic Detection Devices

There were Notifier CPX-551A addressable ionization smoke detectors throughout the building, mounted on Notifier BX501 bases.

Modules

There were Notifier MMX-1A addressable monitor modules supervising the sprinkler system’s tamper and flow switches.