Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Calgary Co-op (Dalhousie)

From FireAlarmPedia
Revision as of 17:40, 10 September 2024 by TwentyThree33 (talk | contribs) (Eduardos)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Edwards iO64
FACP Location: Unknown
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, Genesis
Date of last known Upgrade: 2022
Year Opened: 1973

Calgary Co-op is a chain of member-owned grocery stores across Calgary, Alberta, Canada. They have stores throughout the city, and in surrounding towns and cities such as Airdrie and High River. This particular store is located at 5505 Shaganappi Trail Northwest, in Calgary. The store opened in 1973, and the fire alarm system was installed in 2022.

System Specifications (2022-present)

FACP

The building is protected by an Edwards iO64 conventional fire alarm system. The panel location is unknown. The system coding is temporal.

Annunciators

There is an Edwards RLCD-C annunciator paired with an Edwards RLED24 annunciator at the Health entrance.

Notification Appliances

All notification appliances are Edwards “Genesis” G4AVRF horn/strobes (red, wall-mount). One is installed on a Wheelock RSSP-24MCW strobe plate, which is disconnected.

Initiating Devices

Pull Stations

All pull stations but one are Edwards 270-SPO conventional single-action pull stations, with one being original at the front. The rest were installed in 1996.

There is one Edwards 275-SPO conventional single-action pull station in the backroom.

Automatic Detection Devices

None noticed.

EOLs

There are Edwards EOL-P1 end of line resistor plates on all circuits.

Former System Specifications (1996-2022)

Former System Specifications
FACP: EST ESA2000
FACP Location: Unknown
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Continuous
Strobes Synchronized: No
Date of last known Upgrade: 2010s
Year Installed: 1996
Year Decommissioned: 2022

FACP

The store was protected by an EST ESA2000 conventional fire alarm system. The panel location was unknown. The system coding was likely continuous.

Annunciators

There was an EST annunciator in the health entrance, model to be confirmed.

Notification Appliances

Most of the notification appliances were Edwards 439D-6AWC vibrating bells (6” gong) on EST 403-5A-R (15cd) strobe plates.

There was one Notifier KMS-6-24A motor bell (6” gong) on a Wheelock RSSP-24MCW (red, wall-mount, multi-candela) strobe plate near the entrance as a deficiency replacement. The Wheelock strobe plate still exists, but is disconnected.

Initiating Devices

Pull Stations

All pull stations but one are Edwards 270-SPO conventional single-action pull stations, with one being original at the front. The rest were installed in 1996.

There is one Edwards 275-SPO conventional single-action pull station in the backroom.

These remain on the current system.

Automatic Detection Devices

Not available, there was a sprinkler system.