Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Calgary Fire Department Station 33

From FireAlarmPedia
Revision as of 16:30, 11 September 2024 by TwentyThree33 (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Edwards iO1000
FACP Location: Main Entrance Vestibule
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, Genesis
Date of last known Upgrade: 2020
Year Opened: 2009

The Calgary Fire Department is the fire department for the City of Calgary. This page will cover Station 33, located at 3800 69 Street Southwest, in Calgary, Alberta, Canada. The station was built in 2009, and the fire alarm system was upgraded around 2020.

System Specifications (2020-present)

FACP

The building is protected by an Edwards iO1000 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Edwards’ Signature addressable protocol, and the system coding is temporal.

Notification Appliances

All notification appliances are Edwards “Genesis” G1R-HDVM horn/strobes (red, wall-mount, no marking, set to 15cd).

Initiating Devices

Pull Stations

All pull stations are EST SIGA-270 addressable single-action pull stations.

Automatic Detection Devices

There are Edwards SIGA-PS addressable photoelectric smoke detectors in most areas.

Some areas have EST SIGA-HRS addressable 135°F fixed-temperature/rate-of-rise heat detectors.

All aforementioned detectors are mounted on EST SIGA-SB bases.

There is an EST "SuperDuct" SIGA-SD addressable photoelectric duct smoke detector on the main air handling unit.

Modules

There are EST SIGA-CT1 addressable monitor modules supervising the sprinkler system’s tamper and flow switches. There are EST SIGA-CR addressable relay modules serving various purposes.

EOLs

There are Edwards EOL-P1 end of line resistor plates on all sprinkler and signal circuits.