More actions
| System Specifications |
|---|
| FACP: Simplex 4100+ FACP Location: Main Electrical Room System Type: Single-Stage Conventional System Line Voltage: 120VAC NAC Voltage: 24VDC System Coding: Continuous Strobes Synchronized: N/A Date of last known Upgrade: N/A Year Opened: 1996 |
Edward Milne Community School is a school located at 6218 Sooke Road, in Sooke, British Columbia, Canada. The school opened in 1996, and the fire alarm system is mostly original. The theatre has a separate fire alarm system from the rest of the building.
System Specifications (Main Building)
FACP
The building is protected by a Simplex 4100+ conventional fire alarm system. The panel is located in the main electrical room. The system coding is continuous.
Annunciators
There is a Simplex 4602-9102 annunciator paired with three Simplex 4602-9101 annunciators outside the main entrance.
Notification Appliances
All notification appliances are Simplex 2901-9722 motor bells (10” gong).
Initiating Devices
Pull Stations
All pull stations but one are Simplex MS-301C conventional single-action pull stations. There is a Mircom MS-401 conventional single-action pull station near one exit as a deficiency replacement.
Automatic Detection Devices
There are Simplex 2098-9110 conventional ionization smoke detectors throughout the building. There are Simplex 2098-9465 duct smoke detectors on all air handling units. The building is equipped with a sprinkler system.
System Specifications (Theatre)
| System Specifications |
|---|
| FACP: EST FireShield FACP Location: Main Electrical Room System Type: Conventional System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Temporal? Strobes Synchronized: No Date of last known Upgrade: N/A Year Opened: 1996 |
FACP
The theatre is protected by an EST FireShield FS302G conventional fire alarm system. The panel is located in the main electrical room. The system coding is likely temporal.
Annunciators
There is an EST FSRSI annunciator paired with an EST FSRZI annunciator outside the building, mounted on an EST FSAT-2 chassis.
Notification Appliances
All notification appliances are Edwards 439D-6AWC vibrating bells (6” gong) mounted on Edwards 403-5A-R strobe plates (15cd).
Initiating Devices
Pull Stations
All pull stations are Edwards 270-SPO conventional single-action pull stations.
Automatic Detection Devices
There are Edwards 281B-PL conventional 135°F fixed/rate-of-rise heat detectors mounted on the walls. There is an FDD CR135 conventional 135°F fixed/rate-of-rise heat detector mounted at the top of the theatre.